Advance Paris X-i1100 Integrated Amplifier

$6,799.00 inc GST

or from $5,299.00 today & 5 weekly interest-free payments of $300.00 with Laybuy


The Advance Paris X-i1100 Integrated Amplifier is an enormously powerful amplifier.

It supplies no less than two times 220 watts per channel to speaker systems with an impedance of 8 ohms, and can therefore easily drive a wide range of different speaker systems and always keep them under control.

SKU: X-i1100 Categories: , , , Tags: , , EAN: 3760179291872 Brand: GTIN / EAN: 3760179291872

Description

Advance Paris X-i1100 Integrated Amplifier

The Advance Paris X-i1100 Integrated Amplifier contains many technical advantages.

It is equipped with numerous possibilities, exploited in an intuitive manner, thanks to ergonomics that can set a benchmark, and above all flawless and flawless musicality.

There are many digital inputs: one USB, one AES, and six S/PDIFs, four of which are optical. The outputs are not to be outdone: one dedicated to unbalanced line recording and a preamplifier output, in order to connect an additional power unit to the X-i1100. The X-i1100 can power any type of speaker passive with its 220W effective per channel under 8Ω (400W under 4Ω€!) based on a toroidal transformer of 700VA and 60000uF of filtering capacity.

The preamplification part is not outdone either, with switching relays as close as possible to the inputs. The DAC has two digital signal receivers: an X-Mos processor and a jitter-corrected USB3318 for the USB input and a Cirrus Logic CS8416 for all others, AES and S/PDIF. The chosen converter, a Burr Brown PCM1796, manages signals up to 192 kHz at 24 bits. Metal film resistors and polypropylene capacitors contribute to the quality of reproduction of this integrated amplifier. Mounted on large heat sinks, the amplifier boards, connected to the output terminals by means of 4 mm2 section cables, have a triple push-pull per channel, therefore three pairs of NJW0281 G and NJW0302G bi-polar transistors.

The X-i1100 can operate up to 45 W in a mode similar to class A and switches to class AB beyond, when you activate the switch “High Bias” located on the back of the device.

The mechanical construction has also been meticulous: five compartments forming as many galvanic insulations and contributing to the rigidity of the X-i1100 are integrated into the chassis. optimum ventilation of the X-i1100

 

 

View Datasheet >> View Quick Start Guide >>

 

Connectivities

  • 4x RCA analog audio input
  • 1x MM/MC Phono input
  • 1x PRE OUT output
  • 1x REC or SUB output
  • 2x XLR analog audio input
  • 1x AES/EBU digital output
  • 2x Coaxial digital output
  • 4x Optical digital output
  • 1x Asynchronous USB B Port
  • 2x 12V Trigger Output
  • 1x 6.5 mm JACK socket

 

Specifications

Output power 8Ω 2 x 200W RMS
Output power 4Ω 2 x 400 W RMS
Frequency response 10Hz – 70kHz
Tone control +/- 10dB
Distortion <0.025%
Signal to noise ratio >102dB
Channel separation >75dB
Output impedance 47KΩ Unbal. / ball. 47KΩ
IN LEVEL (CD/AUX) 500mV
Phono MM/MC input level 7mV
Max consumption <700W (StandBy < 0.5W)
Transformer 1 (700VA)
Width 430mm
Height 210mm
Depth 476mm
Net weight 21.4 kg
VU-Meter Yes
DAC PCM 1796

Additional information

Weight 21.4 kg
Dimensions 47.6 × 43 × 21 cm
Brand

Advance Paris

You may also like…