Atoll Electronique IN80 Signature Integrated Amplifier
Like all the electronics of the tricolor brand, the Atoll Electronique IN80 Signature Integrated Amplifier is designed according to strict audiophile standards. It thus benefits from a design using a 340 VA toroidal transformer associated with oversized capacitors to give it a current capacity of 31,474 µF. By comparison, this current capacity is significantly higher than most home theater receivers that need to power multiple speakers. Thanks to this solid power supply, the Atoll IN80 Signature amp is able to keep pace at high volume and in the low register. It can deliver up to 2×80 watts of power into 8 ohms and 2×120 watts into 4 ohms. The Atoll IN80 Signature ampis thus able to efficiently power many compact or column loudspeakers.
View Owners Manual >>
- Amplifier/preamplifier Integrated 2x80Wrms/channel/8Ω
- 4mm aluminum brushed front panel with graved logo and “Wave”, 1,5mm steel chassis, aluminum knob and keys
- Audio stages with discrete components, MKP technology link capacitors, high performances heatsinks
- PCB with double layer nickel/gold, thermal protection
- Toroidal Transformer of 340 VA
- ALPS motorised potentiometer
- Direct access of inputs from the front panel or the remote control
Atoll IN80 Signature: complete connectivity
The Atoll 1N80 Signature hi-fi amplifier has a purely analog design. It has no less than 5 RCA inputs on its rear panel. It is thus possible to connect many sources such as a CD player, a pre-amplified turntable, a network player, etc. Very versatile, the Atoll IN80 Signature also has a By-Pass input to use it as a power amp, as well as two Pre-Out outputs to combine it with an active subwoofer or a power amp. In this case, a 12 V Trigger connector can be used to switch on and off the various elements of the installation simultaneously. Finally, the front panel of the Atoll IN80 Signature ampbenefits from a very high quality headphone output capable of powering the vast majority of headphones and earphones on the market.
Atoll IN80 Signature hi-fi amplifier
The Atoll IN80 Signature hi-fi amplifier has 5 RCA inputs, a By-Pass input and two Pre-Out outputs.
Equipped with a powerful power supply coupled with many audiophile quality components, the Atoll IN80 Signature amp demonstrates exemplary musicality. It can be associated with many compact or column loudspeakers whose full potential it knows how to exploit. Upgradable, the Atoll IN80 Signature amplifier can also receive a digital input card to easily connect and convert all your digital sources, as well as an Atoll P50 or Atoll P100 phono preamp card .
**Optional Digital Board Signature (same as IN200SIG)
1 Bluetooth receiver
2 Coaxial Inputs (24Bits/192kHz)
2 Optical Inputs (24Bits/192kHz)
1 USB-B Input: PCM & DSD
Audio Converter: AKM – AK4490
PCM from 16 bits to 32bits up to 384 kHz on USB-B input (asynchronous).
DSD : DSD64 & DSD128.
USB Interface: XMOS with specific program designed for ATOLL.
|Power Supply (VA)
|Total of capacitors (µF)
|4 + 1 monitor
|Input Impedance (kΩ)
|Rising Time (µs)
|Signal/Noise Ratio (dBA)
|5 Hz – 100 kHz