Eversolo SE100 Passive Hi-Fi Bookshelf Speakers

Description

About the SE100 Passive Hi-Fi Bookshelf Speakers

The Eversolo SE100 Passive Hi-Fi Bookshelf Speakers mark Eversolo’s move into passive loudspeakers, following its success with streamers, DACs and streaming amplifiers. It uses a 25mm silk dome tweeter, a 5.25-inch paper-pulp cone woofer, a front-facing bass port, and what Eversolo calls its BLACKEDGE CORE two-way architecture. Eversolo describes the sound as warm, natural and detailed, with a focus on precise imaging and a holographic soundstage.

The SE100 is rated at 88dB sensitivity, 4-ohm nominal impedance, 55Hz to 20kHz frequency response, 50Hz bass extension at -6dB, and 20 to 100 watts recommended amplifier power. It is also designed around a compact square cabinet that fits neatly into shelves, cabinets and smaller living spaces.

What We Like

The Eversolo SE100 is a very interesting move from Eversolo. The brand is already well known for streamers, DACs and all-in-one digital audio products, so a passive bookshelf speaker gives customers a simple way to build a complete Eversolo-based system. Smart move!!

The SE100 makes the most sense with a compact streaming amplifier or integrated amplifier. Pair it with something like an Eversolo Play, WiiM Amp, Marantz network amplifier or a good stereo amp, and you have a clean, modern system for streaming, TV sound, vinyl or everyday music listening.

The design is also practical. The SE100 uses a front-facing bass port, which makes it easier to place on shelves or inside suitable furniture than many rear-ported bookshelf speakers. The SE100 is shelf-friendly because of the front port, while we still recommend a subwoofer for movies or deeper extension.

There is one important setup point. The SE100 is a 4-ohm speaker, with a listed minimum impedance of 3.2 ohms. That means we would match it with an amplifier that is comfortable driving 4-ohm loads, rather than a very small or underpowered amp.

For NZ customers wanting a compact passive speaker with a modern look, easy placement and a natural sound, the SE100 is a strong option.

 

 

View Eversolo >>

 

The Eversolo SE100 Passive Hi-Fi Bookshelf Speakers Are Ideal For

• Compact stereo systems
• Streaming amplifier systems
• Desktop hi-fi
• Bedrooms and small lounges
• Apartments
• Shelf-based speaker setups
• Eversolo-based systems
• Vinyl starter systems
• Music streaming
• Customers wanting a modern matte black or white bookshelf speaker

 

Frequently Asked Questions

1. What are the Eversolo SE100 speakers?
   The Eversolo SE100 are passive two-way bookshelf speakers designed for compact hi-fi, streaming, desktop and small-room stereo systems.
2. Are the Eversolo SE100 speakers active or passive?
   They are passive speakers. They need an external amplifier, streaming amplifier or AV receiver to drive them.
3. Do the Eversolo SE100 speakers have Bluetooth or streaming built in?
   The SE100 speakers do not have streaming, Bluetooth or amplification built in. Add an Eversolo Play, WiiM Amp, stereo amplifier or AV receiver to power them.
4. What drivers do the SE100 speakers use?
   The SE100 uses a 25mm silk dome tweeter and a 5.25-inch paper-pulp cone woofer.
5. What amplifier power is recommended for the SE100?
   The recommended amplifier power range is listed as 20 to 100 watts.
6. Are the SE100 speakers easy to drive?
   They have 88dB sensitivity, but they are also 4-ohm speakers with a 3.2-ohm minimum impedance. We recommend using an amplifier that is stable into 4 ohms.
7. What is the frequency response of the Eversolo SE100?
   The SE100 is listed at 55Hz to 20kHz, ±3dB, with bass extension to 50Hz at -6dB.
8. Do the Eversolo SE100 speakers need a subwoofer?
   For music in smaller rooms, many customers may be happy without one. For movies, gaming, electronic music or larger rooms, a compact subwoofer is a good upgrade.
9. Can the SE100 speakers go on a bookshelf?
   The square cabinet and front-facing bass port make the SE100 suitable for shelf placement. However, they will still perform best with some space around them.
10. Are the SE100 speakers good for desktop audio?
    They can work well on a desktop with a suitable amplifier, but stands or isolation pads will usually improve imaging and bass clarity.
11. What finish is available?
    The SE100 is available in a matte black / white finish
12. How big are the Eversolo SE100 speakers?
    They measure approximately 290mm high, 180mm wide and 290mm deep.
13. Are the SE100 speakers sold as a pair?
    Retailer listings describe the SE100 as a pair of passive bookshelf speakers.
14. Who are the Eversolo SE100 speakers best suited to?
    They are best for customers who want compact passive bookshelf speakers for a modern streaming, desktop or small-room hi-fi system.

 

What the Experts Say

• What Hi-Fi? reported that the SE100 is Eversolo’s first passive bookshelf speaker, featuring a 25mm silk-dome tweeter, 13.3cm paper-pulp mid/bass driver, front-facing bass port, removable fabric grille and matte black finish.
• T3 noted the SE100’s high-density MDF cabinet, internal damping, matte black finish, 5.25-inch paper-pulp cone, 25mm silk dome tweeter, 55Hz to 20kHz frequency range, 4-ohm impedance and 88dB sensitivity.

 

Key Features

Eversolo’s First Passive Bookshelf Speaker

The SE100 is Eversolo’s first dedicated passive bookshelf speaker, expanding the brand from digital source components into speaker design.

Two-Way BLACKEDGE CORE Architecture

Eversolo describes the SE100 as using BLACKEDGE CORE two-way architecture. This combines a silk dome tweeter and paper-pulp mid/bass driver in a compact cabinet designed for balanced, high-resolution sound.

25mm Silk Dome Tweeter

The SE100 uses a 25mm silk dome tweeter with a high-flux neodymium motor. This is designed to deliver smooth treble, clean detail and a natural top-end balance.

5.25-Inch Paper-Pulp Woofer

The 5.25-inch paper-pulp cone woofer is designed to give the SE100 body, warmth and texture. Retailer specifications list an oxygen-free copper voice coil and a 2.6kHz crossover frequency.

Front-Facing Bass Port

The SE100 uses a front-facing bass port. This makes placement easier on shelves, cabinets or furniture compared with many rear-ported speakers.

Compact Square Cabinet

The SE100 has a distinctive square cabinet, listed at 290 x 180 x 290mm depending on dimension order. What Hi-Fi? and T3 both noted that Eversolo shaped the cabinet to fit neatly into IKEA Kallax-style shelving.

Warm, Natural Sound

Eversolo describes the SE100 sound as warm, natural and detailed, with an emphasis on preserving sonic detail and creating a holographic soundstage.

55Hz to 20kHz Frequency Response

The SE100 is listed with a 55Hz to 20kHz frequency response, ±3dB, and 50Hz bass extension at -6dB. That is useful for a compact bookshelf speaker, while still leaving room for a subwoofer in larger systems.

88dB Sensitivity

The SE100 is rated at 88dB sensitivity, 2.83V at 1m. This is reasonably friendly for a compact bookshelf speaker, but the 4-ohm impedance means amplifier matching still matters.

20 to 100W Amplifier Matching

Eversolo SE100 specifications list a recommended amplifier power range of 20 to 100 watts, with 180W peak handling. This makes it suitable for many compact and full-size stereo amplifiers.

Finish

The SE100 is finished in matte black or white, with a removable fabric grille, the grille is designed to be acoustically transparent.

---

Perfect System Match

A great match would be the Eversolo SE100 with an Eversolo Play or Eversolo Play CD Edition streaming amplifier. This creates a clean, compact Eversolo system with streaming, amplification and speakers all working together.

For a better hi-fi setup, pair the SE100 with an Eversolo DMP streamer into a quality integrated amplifier. Add a subwoofer if you want more bass weight for movies, electronic music or larger rooms.

For placement, the SE100 works well on a solid shelf, cabinet or speaker stand. However, even though the front port helps, we would still avoid pushing the speaker hard against the back of a cabinet. A little breathing space will usually improve imaging and bass control.

 

Specifications

Brand: Eversolo

Model: SE100

Product Type: Passive Bookshelf Speakers

Design
Two-way passive bookshelf speaker

Architecture
BLACKEDGE CORE two-way architecture

High Frequency Driver
25mm silk dome tweeter
High-flux neodymium motor

Mid/Bass Driver
5.25-inch paper-pulp cone woofer
Oxygen-free copper voice coil

Enclosure Type
Bass reflex

Port Position
Front-facing bass port

Crossover Frequency
2.6kHz

Frequency Response
55Hz to 20kHz, ±3dB

Bass Extension
50Hz, -6dB

Sensitivity
88dB, 2.83V at 1m

Nominal Impedance
4 ohms

Minimum Impedance
3.2 ohms

Recommended Amplifier Power
20 to 100 watts

Peak Power Handling
180 watts

Peak SPL
96dB

Cabinet Construction
High-density MDF

Grille
Removable fabric grille

Finish
Matte Black / White

Dimensions (H x W x D)
290 x 180 x 290mm

Weight
17kg per pair, listed by retailer sources

Speakers Per Box
Pair

Rapallo Product Data

MPN: SE100

SKU: EVERSOLO-SE100

EAN / UPC / GTIN: Not publicly confirmed

 

Why Buy From Rapallo

✔ Expert advice on matching bookshelf speakers with the right amplifier
✔ Help building compact Eversolo, streaming or vinyl systems
✔ NZ support and after-sales service
✔ Trusted hi-fi and home entertainment specialists
✔ Practical guidance for speaker placement, subwoofer matching, cabling and setup