Atoll Electronique HD100 Headphone Amplifier

$1,595.00 inc GST


The Atoll Electronique HD100 Headphone Amplifier and USB DAC is equipped with a Burr Brown PCM5102 converter , S/PDIF and USB digital inputs, analog inputs and a dual headphone output. The icing on the cake, it can act as a hi-fi preamp.

The Atoll HD100 is compatible with the most demanding headphones, its power being established at 1.4 W per channel under 32 ohms and a dynamic capacity of 6.8 W! To achieve this result, Atoll has equipped its headphone amplifier with a high power reserve, typical of a stereo amplifier… for speakers.

Do you need an expert?

Our customers tell us that they count on our team for more than just knowledge: they’re always friendly & ready to help with all their questions. Contact our team CJ, Bensan or Toki on 092744515 or via sales@rapalloav.co.nz
 
 

Description

Atoll Electronique HD100 Headphone Amplifier

The Atoll Electronique HD100 Headphone Amplifier is equipped with optical and coaxial S/PDIF inputs as well as a USB type B port.

In the latter case, the supported resolution is limited to 24 bits and 96 kHz, whereas the coaxial input handles PCM streams up to 32 bits and 384 kHz.

The Atoll HD100 is distinguished by a careful design with discrete component output stages and high quality MKP capacitor audio links. This DAC headphone amplifier also benefits from very good manufacturing quality, with a thick steel frame and a brushed aluminum front panel.

The Atoll HD100 headphone amplifier and USB DAC is the ideal partner for high-end hi-fi headphones.

 

View Owners Manual >>

 

Technical Specifications

Design
PCM DAC 32/384
Chipset Burr Brown PCM5102
Discrete component output stages without feedback
MKP capacitors
24-bit USB controller – 32/44.1/48/96 kHz
32-bit / 384 kHz S/PDIF controller via coaxial RCA
Output variable level line

Measurements
Nominal power: 1.4 W at 32 ohms (6.8 W pulse)
Power supply 12.8 VA
Total capacitive: 12,425 µF
Headphone output impedance: 1 ohm for each
Input impedance: 220 kohms
Frequency response: 1 Hz at 150 kHz
S/N ratio: 112 dBA
THD: < 0.01% at 1 kHz
Rise time: 3 µs

Connections
1x Toslink optical S/PDIF input 1x
RCA coaxial S/PDIF
input 1x USB type B
input 2x stereo RCA line input
1x stereo RCA output
2x 6.35 mm jack headphone output

General
Dimensions (WxHxD): 320 x 60 x 220 mm
Weight: 2.5 kg

Additional on HD120:

  • 1 USB-B 24/192kHz asynchronous input
  • 1 Bluetooth input (i2C direct)

Additional information

Weight 2.5 kg
Dimensions 22 × 32 × 6 cm
Brand

Atoll Electronique

You may also like…