PROJECT:
Harrisville Home Theatre
The Harrisville Home Theatre Project started like most. A quick visit to Rapallo with the statement “I am building a new house and I want…. “. So we helped the client through the initial steps of the project all the way through to room completion.
We came onsite to scope the work and went thru the clients needs. There were some challenges to due to door placements and some architectural constraints but we came up with solutuns and then presented them back. Post this we have a few conversations on the specs and styles with final approval then given. The project consisted of a home theatre space with configured around a 140″ screen and in the 7.1.2 format for the sound.
Our teams came onsite to do the initial pre-wire after the roof was on and while the framing was still exposed. Post painting and gibstopping, we installed all the speakers (included custom painted grilles) and then finally once all the dust was settle in the build, we did the final install, setup and calibration. Next on the list of two-do’s, once the client has finished the build & landscaping, is the room acoustics for the theatre room.
Project Components – Harrisville Home Theatre
- Epson TW-9400 Projector
- Indigo Fixed Frame Acoustic Transparent Screen
- Denon Amplifiers – X3800 and DRA-800
- Paradigm Home Theatre In-wall / In-Ceiling speakers
- Klipsch Subwoofer
- Cabling
- Electrical
The Harrisville Home Theatre project consisted of the following Rapallo AV Design & Build services:
- Onsite Consultation – to ensure the setup matches the clients brief and the environment its being used
- Product Selection & Advice
- Project Management
- Installation & setup
- Testing and training
- Post Installation Support
This project was managed by Tokorua Lambert. For a similar project or if you have another project you’d like us to look at, then give Tokorua a call on 09 2744515 or via email tokorua@rapalloav.co.nz
PROJECT:
Office Presentation Space
Our client does high-end office fit outs, and for a recent project they needed a small easy to use Office Presentation Space.
We came onsite before the project kicked-off and did a pre-build walk thru of the requirements. Our team then scoped the project and provided an itemised estimate for the project manager.
Once approved, and when they were ready, we did the pre-wire work. On completion of the building work, we then did the final fit-off and tested the platform. Works a treat. The projector is connected to the screen, so when it is on, the screen drops (or raises). We added a Blustream HDMI wall plate to then allow them to connect a source and use it with the Optoma UHZ-50 projector.
Project Setup – Office Presentation Space
- Screen – 120″ Indigo 16:9 Tab-Tension Screen
- Projector – Optoma UHZ-50
- HDMI Wall Panel – Blustream HEX11WP-TX x HDMI HDBaseT™ Wall Plate Transmitter
The Office Presentation Space project consisted of the following Rapallo AV Design & Build services:
- Onsite Consultation – to ensure the setup matches the clients brief and the environment its being used
- Product Selection & Advice
- Project Management
- Installation & setup
- Testing and training
- Post Installation Support
PROJECT:
A Fabulous Home Theatre Space
Rapallo were contacted by the client as they were building a specific space in their home for a home cinema space.
We were engaged to provide our expert support developing the product specifications for the room and pre-wiring. Using our extensive list of AV products, we managed the product supply and installation. Finally, once the project was completed and the room fully furnished, we used the ARCAM Direc Live to calibrate the room.
The end result was a fabulous room with a big sound and stunning imagery from the JVC projector.
The project consisted of the following Rapallo AV Design & Build services:
- Onsite Visit – we go onsite first to ensure we see and understand the brief
- AV Consultation – to ensure the setup matches the clients brief and the environment before anything is built or ordered.
- Product Sourcing – sourcing products that are specific to an installation.
- Installation & setup – installation of the products / testing.
- Support – post installation support.
