PROJECT:
Pukekohe Hill School
Rapallo were contacted by the school to assist with adding a projection system for the school hall. They had some speakers already install in the hall and they were in need of a projector/screen for other events. There were two key considerations:
- The projection platform was required to integrate with the existing mixing desk and speakers that were already onsite, and
- The space was quite light intensive as there were no curtains and a large skylight towards the front of the hall.
We supplied and installed a Panasonic PT-570E projector on a Vogels mount, and a Yamaha Aventage RX-A780 AVR to control the sound / images. Our team created a bracket / foundation for the projector mount due to the ceiling not having any fixing points, we ran new cabling and added a new bar to hold the 150:” Grandview motorised screen. This was all integrated into the existing mixing desk and speakers. We also tidied up the AV cabinet and cabling.
The outcome was fantastic with a 150″ screen, the visual content can be seen clearly in all areas of the hall. The AV cabinet is now clean and tidy and it allows the school a whole new depth of uses for the hall.
The project consisted of the following Rapallo AV Design & Build services:
- AV Consultation – to ensure the setup matches the clients brief and the environment before anything is built or ordered.
- Product Sourcing – sourcing products that are specific to an installation.
- Installation & setup – installation of the products / testing.
- Projector calibration.
- Support – post installation support.
- Project Partners – Auckland Mobile Scaffolding / Carson Electrical
PROJECT:
Home Theatre Refresh
Rapallo were contacted by clients in central Auckland. They had an existing home theatre room and wanted to upgrade the entire room.
We worked with the client to come up with an AV spec that suited their needs, and the acoustics of the room. Our team of builders / electricians then removed the old cabling (as it ran around the room in ugly conduit) removed the gib and re-routed all the cables in the walls. We replaced an existing door and replaced it with a new cavity slider to remove the space the doors took up. The AV cabinet was updated and tidied up including adding access from the rear and LED lighting and the door was made to fit into the wall so it was almost invisible. The room was then put back together, plastered and painted.
The client choose a great colour for the room (shark) and then a fantastic red carpet to make it a really amazing space. The windows were blanked out and the room is now a “movie santuary” that is pitch black when the lighting is turned off.
It was a complete renovation and the result was outstanding.
The AV system installed in this project was optimised for the dedicated home theatre room and it included:
- Anthem 1120 AVR
- Custom made AV cabinet door and wall hung racking to provide more space
- Klipsch in-ceiling speakers for the Atmos with custom made mounting rings
- SVS Prime Elevation rears and surrounds
- ELAC Muro’s placed on-wall
- 133″ Fixed Frame Acoustic Transparent Screen
- Two Velodyne subwoofers
- Sony 4K Projector
- Vogels Projector Mount
- Russound IR extender
The projected managed by Rapallo and involved builders / electricians / gib-stoppers / painting… and the COVID-19 lockdown!!
The project consisted of the following Rapallo AV Design & Build services:
- Pre-purchase demo @ Rapallo’s demo room.
- Onsite AV Consultation – to ensure the setup matches the clients brief and the environment its being used
- Speaker Optimisation and Positioning
- Project Management
- Rapallo preferred suppliers
- Product sourcing for small wall cavity spaces / long cable runs
- Installation & setup – installation of the products / testing and training.
- Post installation Support
