Topping DX1 Desktop DAC / AMP

$179.00 inc GST

or 6 weekly interest-free payments from $29.83 with Laybuy


The Topping DX1 Desktop DAC / AMP features a brand new AKM DAC chip and supports up to 32-bit/384kHz and native DSD256.

In addition, the DX1 has 2 headphone outputs (3.5mm and 6.35mm) and dual gain settings. It has an impressive 120dB of dynamic range and an XMOS USB controller.

Description

Topping DX1 Desktop DAC / AMP

The Topping DX1 Desktop DAC / AMP can push up to 280mW x2 @32Ω of output power which is enough for any IEMs and efficient full-size headphones. This unit is sure to be a hot topic in audio circles and is the perfect place for budding audiophiles to start their DAC/amp journey.

 

Download User Manual >>

 

Features

  • New-Generation AK4493S DAC Chip
  • Superb clean performance with Ultra-low distortion
  • Supports high-resolution 32-Bit/384kHz PCM and native DSD256
  • XMOS high-performance XU208 USB Receiver
  • Hi-Res Audio Certified
  • Dual Headphone outputs, 6.35mm and 3.5mm
  • Plug & Play, No Adapter Required

 

AK4493S
The DX1 uses newest sub-1lagship AK4493S chips of AKM’s VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493.

 

Plug and play, turn your PC into a HIFI source
DX1 has a wide range of compatibility: Windows 10, Windows 11, MAC, Linux, 1OS, Android can be plug and play. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU208 and Thesycon custom driver (applicable to Windows, other systems are free of driver), which is stable and reliable.

 

No adapter required
Like other USB device, the DX1 does not require an additional adapter for power supply. Only one USB cable can complete the power supply and data transmission.

 

Discrete LNRD
How to solve the noise problem from USB power? The DX1’s answer is the Discrete LNRD circuit (low noise reference driver). The Discrete LNRD circuit filters out the noise and interference of USB 5V power and provides stable and clean power supply of ultra-low noise reference level for DX1 With this technology, the noise of DAC part is lower than 2.0uV, and the noise of AMP part is lower than 1.0uV. Even high sensitive IEMs will not bothered by noise.

 

Powerful output in a small hummingbird size
In such a tiny size, DX1 can provide a maximum output of 280mW x2 without additional power supply.

 

2 gain settings
DX1 provides 2 gain settings, which greatly expands the range of headphone adaptation.

 

Jitter is no longer an issue
After excellent detail processing, the jitter of DX1 is as low as -160dB, which is close to the measurement limit.

DX1 has both 6.35mm and 3.5mm headphone output to meet more needs.

 

Excellent enough for serving as a pure DAC
DX1 has Line out with fixed volume, which can be used as a pure DAC with headphone amplifiers, power amplifiers and other equipment.

 

Specifications

DX1 DAC Parameters (USB ln@44. 1kHz )
THD+N @1kHz (A-wt)<0.0002 %
THD @20-20kHz 90kBW<0.0006%
SNR @1kHz (A-wt):120dB
Dynamic range @1kHz (A-wt):120dB
Frequency Response:
20Hz-20kHz (±0.3dB)
20Hz-40kHz (±0.7dB)
Output Level:2.0Vrms @0dBFS
Noise (A-wt) <2.0uVrms
Channel Crosstalk @1kHz:-112dB
Channel Balance:0.3 dB
Output Impedance:22Ω

DX1 Headphone Amplifier Specifications
THD+N @1kHz ( A-wt)
<0.0003% @ Output=200mW (32Ω)
<0.0002% @Output=4 5mW (300Ω)
THD @20-20kHz 90kB W
<0.003% @Output=200mW (32Ω)
<0.001% @Output=45mW (300Ω)
SNR @MAX OUT 1kHz ( A-wt):118dB
Dynamic Range @1kHz (A-wt):118dB
Frequency Response
20Hz 20kHz (±0.3dB)
20Hz-40kHz (±0.7dB)
Output Level
2.2Vpp @G=L
11Vpp @G=H
Noise ( A-wt)< 1.0uVrms
Channel Crosstalk @ 1kHz:-86dB
Gain:-2dB (Vrms/FS) @G=L
12dB (Vrms/FS) @G=H
Output Impedance< 0.5Ω
Output Power
280mW X 2 @32Ω THD+N<0.1 %
190mW X 2 @64Ω THD+N<0.1 %
51mW X 2 @300Ω THD+N<0.1 %
Load Impedance>8Ω

Additional information

Weight 5 kg
Dimensions 16 × 22.2 × 4.5 cm
Brand

Topping

You may also like…