ProAc K1 Bookshelf Speakers

$14,999.00 inc GST


The ProAc K1 Bookshelf Speakers use the specialist Kevlar cone and proven ribbon tweeter, which is used throughout the K Series range.

ProAc have however, made certain modifications to the cabinet, bass driver and tweeter to make it adaptable and suitable for a stand-mounted loudspeaker.

*contact us for colour availability.

Do you need an expert?

Our customers tell us that they count on our team for more than just knowledge: they’re always friendly & ready to help with all their questions. Contact our team CJ, Bensan or Toki on 092744515 or via [email protected]
 
 

SKU: ProAc_K1 Categories: , , , Brand:

Description

ProAc K1 Bookshelf Speakers

Although the ProAc K1 Bookshelf Speakers are a stand-mounted speaker, it has a surprisingly extended and accurate bass response with the familiar, beautiful midrange from the K Series bass drivers.

The unique K design cabinet, with its vent porting, has been incorporated into the K1 alongside a specially designed dedicated stand to complement and bring out the best in the speaker. The K1 stand is also available separately.

Considering its size, the K1 gives an impressive sound stage for a stand-mounted speaker with an almost electrostatic open midrange and very accurate bass, a characteristic of the K Series range.

We are sure that the K1 will not disappoint.

 

Specifications

  • Nominal Impedance 8 ohms
  • Recommended Amplifiers 10 to 150 watts
  • Frequency Response 28Hz to 30Khz
  • Sensitivity 90 dB linear for 1 watt at 1 metre
  • Bass Driver/midrange Bass and midrange frequencies are both covered by a single 6.5” (165mm) Kevlar coned unit, the Kevlar cone covers all frequencies up to 30Khz and slightly above.
  • Tweeter Ribbon The ProAc ribbon tweeter has a ribbon lighter than a human hair with rear chamber damping and alnico magnet.
  • Crossover Finest components on dedicated dual layer circuit board. ProAc Multistrand oxygen free copper cable throughout. Split for optional Bi wiring or Bi amplification
  • Height 569mm (22.4 “)
  • Width 210mm (10.4”)
  • Depth 203.2mm 8 inches
  • Mode Stand mounting
  • Grille Acoustically transparent crimplene
  • Standard Finishes Black Ash, Mahogany, Cherry, Natural Oak, Silk White and Walnut.
  • Premium Finishes Rosewood, Ebony NEW Tamo Ash, Dark Eucalyptus *Premium Finishes to order at extra cost*
  • Dedicated K1 stand available separately Height 500mm (19.7”) Top plate 320mm x 190mm (12.6” x 7.5”) 15kg (33lb) each stand

Additional information

Weight 8.8 kg
Dimensions 28 × 18.2 × 32 cm
Brand

ProAc

You may also like…