Pro-Ject Record Puck

$119.00 inc GST

The Project Turntable Record Puck is for use on Project turntables, its 750g weight ensures a firm fit between the record and the platter surface. Also suitable for most other turntables with similar size spindles. 

Modern vinyl records are thin, flexible and often warped or bowed. As most records do not lie flat on the turntable platter, sound reproduction suffers due to un-damped vinyl resonances caused by the stylus riding on an unsupported record. Records which are bowed downwards contact the platter at the outer edge but not in middle. Conversely, records that are warped or bowed upwards tend to rock on the platter. In these instances anti-skating compensation is less effective and record wear is increased substantially by the lateral or vertical see-saw motion of the tonearm/cartridge combination.

The Project Turntable Record Puck solves the above problems by bringing the record into more intimate contact with the platter.


  • Heavy brass record puck (750g)
  • Ensures record sits flat on platter
  • Suits any turntable with non-threaded spindle
  • Only to be used on turntables with high quality bearing

Additional information

Weight 1.3 kg
Dimensions 20 × 20 × 15 cm