Ortofon DJ Concorde MkII Digital Cartridge

$259.00 inc GST

The Ortofon DJ Concorde MkII Digital Cartridge is designed to extend the life of timecode vinyl and minimize errors in decoding.

At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl. Makes you vinyl sound like you are right there.


Ortofon DJ Concorde MkII Digital Cartridge

The optimized 10 mV output voltage in the Ortofon DJ Concorde MkII Digital Cartridge maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal. Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.

Concorde DIGITAL is available in following configurations:

  • Concorde TWIN (two Concorde MkII MIX cartridges with preinstalled styli), supplied in Flight case
  • Concorde Single (one Concorde MkII MIX cartridge with preinstalled stylus)


View the User Guide >>



Stylus Type: Special Elliptical
Tracking Force: 4.0 g
Output Voltage: 10 mV
Frequency Range: 20–18.000 Hz

Output voltage at 1000Hz, 5cm/sec. – 10 mV
Channel balance at 1kHz – 1 dB
Channel separation at 1kHz – 22 dB
Channel separation at 15 kHz – 15 dB
Tracking ability at 315 Hz at recommended tracking force – 100 μm
Compliance, dynamic lateral – 14 μm/m N
Stylus type – Spherical R 18 μm
Tracking force range – 3 – 5 g
Tracking force recommended – 4 g
Internal impedance, DC resistance – 1200 Ohm
Internal inductance – 850 mH
Recommended load resistance – 47 kOhm
Recommended load capacitance – 200-400 pF
Cartridge weight – 18,5 g
Replacement stylus unit – DIGITAL

Additional information

Weight 1 kg
Dimensions 20 × 20 × 10 cm


You may also like…