Ortofon DJ Pro S Replacement Stylus

$69.00 inc GST


The Pro S entry-level cartridge is perfect for newcomers on the DJ scene who want to start off with decent, but not too expensive equipment.

The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable. No matter what the application, the Pro S provides remarkable versatility for virtually any setting. The sound quality is absolutely not to worry about.

The Pro S is a consistent performer and a fine all-arounder!

Do you need an expert?

Our customers tell us that they count on our team for more than just knowledge: they’re always friendly & ready to help with all their questions. Contact our team CJ, Bensan or Toki on 092744515 or via [email protected]
 
 

Description

View Ortofon Support >>

 

SPECIFICATIONS

Output voltage at 1000Hz, 5cm/sec.  –  5 mV
Channel balance at 1kHz  –  2 dB
Channel separation at 1kHz  –  20 dB
Channel separation at 15 kHz  –  15 dB
Frequency response   –  20-18.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommended tracking force  –  70 μm
Compliance, dynamic lateral  –  7 μm/m N
Stylus type –  Spherical
Stylus tip radius –  R 18 μm

Tracking force range  –  3.0-5.0 g (30-50 mN)
Tracking force recommended  –  4.0 g (40 mN)
Tracking angle  –  20°
Internal impedance, DC resistance  –  750 Ohm
Internal inductance  –  450 mH
Recommended load resistance  –  47 kOhm
Recommended load capacitance  –  200-600 pF
Concorde / OM cartridge weight  –  18.5 g / 5.0 g

Compatible with cartridges –  Concorde Pro S and OM Pro S

Additional information

Weight 1 kg
Dimensions 20 × 20 × 10 cm

You may also like…