JBL Synthesis SCL-7 Dual In-Wall Speaker

The JBL Synthesis SCL-7 Dual In-Wall Speaker is the smallest traditional in-wall model in the JBL Synthesis Custom Loudspeaker (SCL) series.

It is designed for use as a width or surround channel or as an LCR in smaller systems.


JBL Synthesis SCL-7 Dual In-Wall Speaker

The JBL Synthesis SCL-7 Dual In-Wall Speaker features JBL’s patented 2410H-2 1-inch (25mm) compression driver mated to an offset High Definition Imaging (HDI™) horn. This patented horn design is integrated with two 5.25-inch (130 mm) Advanced Aluminum Matrix cone cast-frame woofers into a precision molded baffle assembly. The innovative configuration yields incredibly smooth and consistent performance for off-axis placement up to 45 degrees from the listening position. The SCL-7 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in small to medium rooms.


View Owners Manual >> View Specifications >>



  • Zero-bezel, Magnetically-attached Paintable Grille
  • Molded Baffle with Patented Cat Claw Installation Mechanism
  • Advanced Crossover Network
  • Gold-plated Spring-loaded Binding Post Input Terminals



Type – 2-Way In-wall loudspeaker
Low Frequency Driver – Two 5.25” (130 mm) advanced Aluminum Matrix cone cast-frame woofers (JW13Al-4)
High Frequency Driver – 1″ (25 mm) 2410H-2 Teonex annular ring-diaphragm compression driver
Recommended Amplifier Power – 25 – 150W RMS
Impedance – 4 Ohm
Loudspeaker Sensitivity – 88 dB/2.83V/1m (2pi anechoic)
Frequency Response – 55Hz – 30kHz (-6 dB on-axis), 2pi anechoic
Crossover Frequency – 2.0 kHz
High Frequency Coverage Angle (-6 dB) – 60° Vertical, 90° Horizontal (Left
Enclosure Type – Open back
Controls – Boundary Proximity Control
Grille Dimensions – 7.32” (186 mm) x 19.15” (486 mm)
Product Dimensions (with grille) – 7.32” (186 mm) x 19.15” (486 mm) x 3.88” (99 mm)
Cut-out Dimensions – 6.18” (157 mm) x 18.03” (458 mm)
Rough-in Bracket – WB52
Mounting Depth – 3.64” (93 mm)
Input Type – Gold-plated spring-loaded binding posts
Product Weight – 12.6 lbs (5.72 kg)
Shipping Weight – 14.6 lbs (6.62 kg)
Shipping Units of Measure – Each
Warranty – 5 Years

Additional information

Weight 5.72 kg
Dimensions 9.9 × 18.6 × 48.6 cm

JBL Synthesis

You may also like…