iFi Audio SilentPower Mercury 3.0 USB Cable

$399.00 inc GST


The iFi Audio SilentPower Mercury 3.0 USB Cable single run cable has quadruple shielding.

This is to fully separate and protect the delicate USB data signal from the USB power and reduce noise contamination.

Do you need an expert?

Our customers tell us that they count on our team for more than just knowledge: they’re always friendly & ready to help with all their questions. Contact our team CJ, Bensan or Toki on 092744515 or via [email protected]
 
 

SKU: MERCURY3-USB Categories: , , , EAN: 5081313081752 Brand: GTIN / EAN / UPC: 5081313081752

Description

iFi Audio SilentPower Mercury 3.0 USB Cable

The iFi Audio SilentPower Mercury 3.0 USB Cable comes with the newest version of our custom-made RF noise silencers. Maximum signal transfer. Minimum interference.

 

View iFi Audio Products >>

 

Features

  • Exceptional design – Our iFi FINAL USB connectors provide impeccable end-to-end RF shielding, being machined entirely from solid, aircraft-grade aluminium. Plus gold-plated connections make for years of steadfast service.
  • The Power of RF3 – Most standard USB cables do not address RF issues and are fitted with filters that work over too narrow a range and are only fitted at the ends of the cables, leaving the length of the cable to act as an antennae.
  • SuperSpeed – USB3.0’s ultra-speed bandwidth of 5.0Gbps offers an incredibly wide bandwidth, 10x that of USB2.0’s 480Mbps.
Cool, calm, collected. Custom.

The Mercury3.0 custom minimum inductance parallel type with quadruple-shielding. This offers even more protection from RFI and EMI noise than the original. Sound quality is not compromised as with many ‘off the shelf’ versions where inadequate shielding is commonplace.

Critically, the whole design hardly has a 5% tolerance to the 90ohm impedance rule.

Quad-tastic

TheMercury3.0cable separates the audio signal from the power with quadruple shielding to eliminate interference and jitter. It employs heavy OFHC continuous copper silver matrix conductors for the best possible signal transfer.

How do I use Mercury 3.0

Insert the FINAL USB type ‘A’ connector to a USB port on the computer. Insert the FINAL USB type ‘B’ 3.0 or 2.0 (depending on the version purchased) connector labelled iFi into the USB port of the DAC or the purifier2/iUSB 3.0(which is then connected to the DAC).

 

Specifications

Construction

Minimum inductance parallel construction

Conductors

24 and 28AWG

Conductor material

Heavy OFHC continuous cast copper silver matrix

Insulation

HD Polyethylene

Shielding

Quadruple-shields

Impedance

90Ohms

AC spark insulation

1500V

Connectors

iFi ‘FINAL’ USB connectors

Insulation resistance

100Mohm

Tensile Strength

1500PSI

Lengths/Weights

0.5m/98g (0.22 lbs)
1.0m/115g (0.25 lbs)

Warranty period

12 months

Additional information

Weight .33 kg
Dimensions 6.9 × 1.9 × 2 cm
Brand

ifi Audio

You may also like…