Description
Chord Electronics Symphonic Moving Coil Phonostage
The Chord Electronics Symphonic Moving Coil Phonostage offers an almost infinite number of input impedance and gain options as well as balanced and unbalanced input options to the cartridge, making it a highly flexible device for integrating high-quality turntables into Chord systems.
The comprehensive settings options are all externally selectable, with selections signified internally with illuminating LEDs.
A rumble filter removes unwanted low-frequency rumble signals appearing on both channels.
The Symphonic Phono stage conforms to the RIAA curve without the IEC roll-off when the Rumble filter is set to ‘off’ Preamps: CPA 2500, CPA 3000, CPA 5000, and CPA 8000. Preamps: CPA 2500, CPA 3000, CPA 5000, and CPA 8000.; this is commensurate with the high calibre of Chord amplification.
The IEC curve response can be added by setting the Rumble filter to ‘on’. According to the wiring of the tone arm on the turntable used, the Symphonic can be operated in either an unbalanced or balanced mode.
- Selectable Impedance: 4.7Ω, 33Ω, 100Ω
- Selectable Gain: 40dB – 80dB
- Inputs: 1x Stereo Balanced XLR Pair // 1x Stereo Unbalanced RCA Pair
- Outputs: 1x Stereo Balanced XLR Pair // 1x Stereo Unbalanced RCA Pair
The high-performance Symphonic uses their high-frequency power supply technology to exploit vinyl’s full potential, along with many new key features, to bring the performance levels in line with the Choral range, home of the DAVE DAC/preamp.
Reviews
- Hi-Fi Wigwam
- Enjoy The Music
Features
- Moving Coil Cartridge Only
- HF Switch Mode Power Supply
- Selectable Gain
- Selectable Impedance
- Rausch Slope Rumble Filter
- Balanced XLR Input
- Fully Balanced Circuitry
- Unbalanced RCA Input
- Balanced XLR Output
- Unbalanced RCA Output
- Solid Aluminum Chassis
Specifications
- Input Noise: 1.5nV/Hz
- Max Output Voltage RMS: 10v
- Equalisation Range: 12Hz to 25kHz
- Equalisation Response: RIAA Curve
- Equalisation Accuracy: +/- 0.1dB
- Frequency Response: 5Hz – 40kHz
- Rumble Filter: Rausch Slope -24dB per octave below 50Hz
- Output Impedance: 520Ω (resistive)
- Output Drive: Can drive 600Ω at 50% output
- Input Power Supply: 50v AC – 260v AC – auto adjust 50Hz – 60Hz
- Dimensions (including connectors): 333.5mm (W) x 59mm (H) x 142mm (D)
- Weight: 6kg