Bowers & Wilkins Marine 6 Outdoor Speakers

$1,299.00 inc GST


The Bowers & Wilkins Marine 6 Outdoor Speakers are a two-way loudspeaker with a 25mm (1-in) tweeter and a 150mm (6-in) polypropylene bass/midrange driver.

It boasts an IP66 rating for incredible ruggedness when installed, and is the more compact of the Marine loudspeakers, fitting into a depth of 88mm (3.5-in) with a cut-out of 200mm (7.8-in).

Do you need an expert?

Our customers tell us that they count on our team for more than just knowledge: they’re always friendly & ready to help with all their questions. Contact our team CJ, Bensan or Toki on 092744515 or via [email protected]
 
 

SKU: Marine 6 Categories: , , , , Brand: Bowers & Wilkins EAN: 0714346324828 Brand: GTIN / EAN / UPC: 0714346324828

Description

Bowers & Wilkins Marine 6 Outdoor Speakers

The Bowers & Wilkins Marine 6 Outdoor Speakers work against the elements. Whether it gets soaked, sprayed with salt-water or hosed down, Marine 6 is designed to keep on bringing you superb sound.

The marine environment is unforgiving. Any equipment has to survive extremes of temperature, salt spray and hosing down. It’s little wonder then that most speakers designed for marine applications sacrifice sound quality for ruggedness.

Of course, any Bowers & Wilkins speaker must sound brilliant.

So these marine speakers were first designed to match exacting sound quality standards, then the necessary toughness to survive the harsh marine environment was added. Both models boast IP66 ratings when properly installed, and the metal grille and all screws are marine-grade stainless steel. The driver chassis uses a non-corroding rigid polymer and the tweeter dome has a rear support to prevent permanent deformation when hosed down. Marine 6 and Marine 8 are super-tough to deal with the most demanding installation environments, with Bowers & Wilkins superior, uncompromising audio quality.

 

View Quick Start Guide >> View Specifications >>

 

Features

  • A 25mm (1-in) tweeter and a 150mm (6-in) polypropylene bass/midrange driver
  • It boasts an IP66 rating
  • Fits into a shallow depth
  • Outer Diameter – Ø243mm (9.6 in)
  • Cut Out Diameter – Ø202mm (8 in)
  • Depth Behind Surface – 88mm (3.5 in)
Built tough to sound strong

With a marine-grade stainless steel chassis and grille, and polypropylene drivers, Marine 6 sounds great even in a storm.

 

Specifications

Description 2-way system
Drive units 1x Ø25mm (1-in) soft dome tweeter
1x Ø150mm (6-in) polypropylene
cone bass/midrange
Frequency range 55Hz – 30kHz
Recommended amplifier power 20W – 80W
Sensitivity 89dB (2.83V, 1m)
Nominal impedance
Pre-mount kit C6
Back box 6C (not suitable for marine applications)

 

Additional information

Weight 2 kg
Dimensions 29.2 × 29.2 × 9.3 cm
Brand

Bowers & Wilkins

You may also like…