Musical Fidelity V90-LPS MM/MC Phono Stage

$599.00 inc GST

or 6 weekly interest-free payments from $99.83 with Laybuy


The Musical Fidelity V90-LPS MM/MC Phono Stage is a modestly priced, very high performance MM/MC phono stage with superb technical performance.

If you want top notch performance, and don’t care about the alleged conferred status of buying a high-priced product that offers no better performance than the V90-LPS, then we are of a like mind.

Description

Musical Fidelity V90-LPS MM/MC Phono Stage

The Musical Fidelity V90-LPS MM/MC Phono Stage has extremely accurate RIAA correction and that extends up to 80 kHz and beyond. That may sound extreme, but there is a good deal of information above 20 kHz that needs correction. If it isn’t corrected, it will show itself as ringing and overshoot.

View Product Brochure >>  View Owners Manual >>

 

In our opinion, there are five critical areas where a phono stage must achieve excellence:

  1. RIAA correction 
  2. Correction above 20 kHz 
  3. Low distortion 
  4. Low noise 
  5. Good overload margin
  6. MM/MC phono stage

The V90-LPS’s distortion is very low. Noise ratio is extremely low and all but inaudible. Overload margin is easily adequate for any current cartridge.

All in all, the V90-LPS accomplishes everything necessary for a phono stage.

There are many phono stages that are far more expensive and make extraordinary claims for their performance. In contrast, the modest V90-LPS just gets on with the job of doing everything you could reasonably expect from a phono stage.

If you want top notch performance, and don’t care about the alleged conferred status of buying a high-priced product that offers no better performance than the V90-LPS, then we are of a like mind.

 

V90-LPS In Brief 

  • Switchable MM / MC input
  • Extremely accurate RIAA extending out to at least 60kHz
  • Very low noise (virtually inaudible)
  • Very low distortion
  • Excellent overload margin
  • Excellent channel separation
  • Beautiful, considered build quality

 

Specifications

Performance 

  • Input impedance: 47kOhm (MM), 100Ohm (MC)
  • Input sensitivity: 3.0mV (MM), 400μV (MC) – for 300mV out
  • Total harmonic distortion: 0.01% (MM/MC) – @ 1kHz, 300mV out
  • Frequency Response: +0, –0.1dB, 20Hz to 20 kHz
  • Signal / Noise ratio (A weighted): >80dB (MM), >70dB (MC)
  • Input overload margin: 15dB (MM), 22dB (MC)
  • RIAA response: +/- 0.25dB

Inputs 

  • MM: 1 pair RCA sockets
  • MC: 1 pair RCA sockets

Outputs 

  • 1 pair RCA sockets

General 

  • Dimensions – WxHxD (mm): 170 x 47 x 102
  • Weight (unpacked / packed): 600g / 1.1 kg
  • Supplied Accessories
  • 1x 12v 500mA DC power supply

Additional information

Weight 1.1 kg
Dimensions 10.2 × 17 × 4.7 cm

You may also like…