Blustream PRO-OUT4TLS V2 4-Way HDMI / HDBaseT™ CSC Output Board – 4K HDR up to 40m

$2,799.00 inc GST


The PRO-OUT4TLS-V2 output board offers 4 x dual HDBaseT™ outputs for connection to a HDBaseT™ receiver and HDMI display per zone.

The PRO-OUT4TLS-V2 utilises CSC technology allowing support of HDMI 2.0 4K 60Hz 4:4:4 (18Gbps) HDCP 2.2 signal distribution up to lengths of 40m (1080p to 70m). It features independent down-scaling of 4K video inputs on the CSC HDBaseT™ outputs to allow displays only capable of supporting lower video resolutions to receive 4K video while still showing maximum original 4K UHD resolution on the higher-definition displays.

The PRO-OUT4TLS-V2 also features quick release card module fittings allowing simple installation into the Custom Pro Matrix hub.

Do you need an expert?

Our customers tell us that they count on our team for more than just knowledge: they’re always friendly & ready to help with all their questions. Contact our team CJ, Bensan or Toki on 092744515 or via [email protected]
 
 

SKU: PRO-OUT4TLS Categories: , , , Brand:

Description

FEATURES

  • Advanced HDBaseT™ technology offering distribution of video and audio over a single CAT cable
  • Features 4 x simultaneous HDMI / HDBaseT™ outputs for connection to HDMI displays and HDBaseT™ Receivers
  • Advanced Colour Space Conversion (CSC) supports HDMI 2.0 18Gbps specification including HDR support
  • Supports 4K 60Hz 4:4:4 UHD video up to 40m*
  • Independent down-scaling of video input resolutions up to 4K 60Hz 4:4:4 to the following formats:
    •  1080p 60Hz (for screens that do not support 4K)
    • 4K 60Hz 4:2:0 (for screens that do not support full 4K 60Hz 4:4:4)
  • Extends HDMI 1080p video up to 70m
  • Supports all known HDMI audio formats including Dolby TrueHD, Atmos and DTS-HD Master Audio transmission
  • Supports PoC to power Blustream HDBaseT™ Receivers
  • Quick release card module fittings allowing simple population of input and output cards in Custom Pro Matrix Hub
  • HDCP 2.2 Support
  • To be used with the HEX70CS-RX Receivers

    *For HDMI 2.0 18Gbps video distribution the PRO-OUT4TLS-V2 must be used with a HDMI 2.0 18Gbps Custom Pro input board

 

SPECIFICATIONS

  • Video Output Connectors: 4 x HDMI Type A, 19-pin, female, 4 x HDBaseT™ RJ45 connector
  • Card Dimensions (W x H x D):182mm x 22mm x 177mm
  • Dimensions Including Connections (W x H x D): 202mm x 22mm x 188mm
  • Shipping Weight: 0.5kg
  • Operating Temperature: 32°F to 104°F (0°C to 40°C)
  • Storage Temperature : -4°F to 140°F (-20°C to 60°C)

Additional information

Weight 5 kg
Dimensions 25 × 35 × 25 cm
Brand

Blustream

You may also like…