Pro-Ject Strobe It Disc and Alignment Tool

$65.00 inc GST


This stroboscope disc allows you to accurately adjust the speed of your turntable to 33½, 45 and 78rpm.

Designed for use in artificial light, the disc’s pattern will appear to be static when the turntable’s speed is correct (due to the 50Hz mains frequency).

All you need to do it place the disc on your platter, turn on your light, and then adjust your turntable’s speed control until the pattern on the disc doesn’t move. As an extra bonus, the rear of the disc features a handy diagram for cartridge alignment.

Do you need an expert?

Our customers tell us that they count on our team for more than just knowledge: they’re always friendly & ready to help with all their questions. Contact our team CJ, Bensan or Toki on 092744515 or via [email protected]
 
 

SKU: PRO-STROBE-IT-XXX-XXX Categories: , , , Brand: GTIN / EAN / UPC: 9120007686876

Description

How do I determine the correct speed with Strobe it?
Strobe it shows circular arranged dashes that are assigned to speed and frequency. Please remember the ring that matches your desired speed and frequency (33 1/3 rpm with 50 Hz and 45 rpm with 50 Hz are valid for Europe). Put Strobe it on the turntable platter and start the turntable. The tonearm remains in its initial position. Align a mains powered light source directly to the turntable with Strobe it rotating. The dashes of the previously pinned ring should now give the impression to stand still. If they seem to move slightly forward or backwards, the speed is either too high or too low. Please note: Use normal mains operated lamps. Daylight, fluorescent lamps (energy saving lamps) as well as flashlights and LEDs, which are operated with direct current, are not suitable.

Additional information

Weight 1 kg
Dimensions 25 × 25 × 5 cm