Furman M-10X E Power Conditioner

$399.00 inc GST

Install an Furman M-10X E Power Conditioner in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load.

Do you need an expert?

Our customers tell us that they count on our team for more than just knowledge: they’re always friendly & ready to help with all their questions. Contact our team CJ, Bensan or Toki on 092744515 or via sales@rapalloav.co.nz

SKU: M10XE Categories: , , Tags: , Brand:
Customer Reviews
5.0 Based on 1 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • response
  • item
  • advice

Excellent Service

Very prompt in sending out the item ordered and when I rang for further advice on how to use the item, I also received immediate response.

Ben B.


Furman M-10X E Power Conditioner

The Furman M-10X E Power Conditioner is a Merit Series Power Conditioner which is the perfect low-cost AC power solution for any rack mount system.


View Owners Manual >> View Datasheet >>



  • Noise Filtration – AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
  • Surge Protection – Spike & surge protection ensures equipment stays safe and your power stays clean
  • 11 Total Outlets – 10 rear panel outlets and 1 front panel convenience outlet
  • 10 Amp Rating – 10 amp rating, with circuit breaker
  • “Protection OK” Indicator – Front panel indicator LED lets you know that your equipment is being protected



  • INSTRUMENT RIGS – You’ve got a rack for your effects, preamps, tuner…You’re going to plug that into the wall? One big spike and your rig is up in smoke. Furman’s standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman’s standard level RFI/EMI filtration, you’ll get a quieter tone without pops, crackles, and the local radio station coming out of your amp. Plus, dual pull-out lamps (M-10Lx E) let you see your rack without turning the house lights on.
  • RECORDING – Can’t track down where that noise is coming from? Your mix sounding flat? With Furman’s standard level RFI/EMI filtration you’ll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman’s standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 10A capacity and eleven total outlets, it’s enough to power your whole home studio.
  • DJ EQUIPMENT – Bars, clubs and other event venues have some of the worst power out there – from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman’s standard level protection and filtration keeps the bad stuff out.
  • PRO AUDIO – When you’re out there gigging, you never know what kind of power you’re going to get. The wear and tear on mobile rigs eventually takes it toll – that’s why it’s smart to plug into Furman’s standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether you’re setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.



  • Family Merit Series 240V
  • Line Voltage2 40 (Volts)
Shipping Info
  • Length 21.8 (Inches)
  • Width 12.2 (Inches)
  • Height 3.3 (Inches)
  • Weight 6.75 (Lbs)
  • Unit of Measure Each
  • UPC654061028031
  • Master Pack Qty6

Additional information

Weight 3 kg
Dimensions 54 × 25 × 12 cm


You may also like…