ELAC Debut ConneX DCB41 Powered Speakers
The ELAC Debut ConneX DCB41 Powered Speakers consist of one powered speaker and one passive speaker that are linked together. You can select either speaker for use as the left or right channel.
The powered (primary) speaker houses the amplifiers for both speakers. There is no need to connect the speakers to an additional amplifier, stereo, or home theater receiver. The primary speaker includes all the physical source connections as well as Bluetooth antenna. The audio signals needed for the passive (secondary) speaker are transferred from the primary speaker via traditional speaker terminals and wire.
Flexible Connection Options
Connect to just about anything with a wide number of input options including: HDMI ARC, USB Audio (PC/Mac), Bluetooth (aptX), Digital/Optical, and Analog/Phono.
Built-In, High-Quality Amplifiers
The Debut Connex speakers feature two 50-Watt Class D amplifiers built directly into the speaker.
These amplifiers have been acoustically matched to the ConneX drivers and are designed to run cool and efficient.
Enhanced Bass Response
ConneX includes Elac’s proprietary XBass Enhancer, providing a better overall bass extension and output (can be turned off).
For better lower frequency extension and to minimize ventilation noise, the bass reflex port on the DCB41 is directed to the rear, in an “S” configuration.
Connect the HDMI ARC output from your compatible television and your TV’s remote control will control the volume of the Debut Connex speakers.
USB Connection – High-Res 96Khz 24-bit
Connect a USB cable from your Windows or Mac computer to the USB input on the DCB41, and you can enjoy high-resolution audio playback up to 96kHz 24-bit. The speakers’ volume can be controlled by the computer’s volume control.
Bluetooth with aptX
Playback your favorite music or podcast from your phone, tablet or computer using Bluetooth. To ensure the best possible quality the DCB41’s feature aptX technology delivering true CD quality audio from compatible phones.
Built-In Phono Preamp
The switchable built-in phono pre-amp allows you to connect just about any turntable directly to the speakers using standard RCA cables. A ground screw is also included. Turn off if you prefer not to use.
Speaker Type: Bass Reflex / Powered
Amplifier Power: 50 Watts x2
Tweeter: 3/4″ Soft Dome
Woofer: 4-1/2″ Polypropylene
Frequency Response: 66Hz—25,000Hz (Anechoic) / 50Hz—25,000Hz (In-Room)
Maximum System Output102dB @ 1m
Inputs: HDMI (ARC) / USB (96kHz 24-Bit) / Analog Line/Phono (Switchable) / Optical / Bluetooth (AptX)
Outputs: Subwoofer and Speaker
Remote Control: Yes (Infrared)Included
Accessories: Remote Control / Batteries / HDMI Cable / Speaker Wire / Power Cord / Rubber Feet / Grilles
Firmware Upgradeable: Yes
WEIGHT: 3.44 kg
DIMENSIONS (DxWxH) : 203 × 140 × 244 mm
COLOUR: Black Ash, Royal Blue, Walnut