Description
Atoll Electronique AM100 Signature Power Amplifier
The Atoll Electronique AM100 Signature Power Amplifier is made according to strict audiophile standards.
It benefits from a symmetrical diagram and implements discrete components for its output stage, in particular Mos-Fet transistors. These electronic chips have always been renowned for their great musicality, in particular their ability to deliver robust and fluid sound.
This Atoll power amp is also equipped with a 680 VA toroidal transformer and a current capacity of 32,447 µF. While these numbers don’t necessarily speak for themselves, they do demonstrate the amp’s ability to keep up at high volume and in the low register.
By comparison, the Atoll AM100 Signature amphas a much higher current capacity than most home cinema amplifiers. It can thus deliver up to 2×100 watts into 8 ohms and 2×140 watts into 4 ohms. The Atoll AM100 Signature power amp is thus able to efficiently power most compact or column speakers on the market.
View Owners Manual >>
Features
- Atoll AM100 Signature: RCA input and output – On its rear panel, the Atoll AM100 Signature power amp has two pairs of speaker terminals compatible with large section cables, banana plugs and forks. There is also an RCA input intended to receive the signal from the preamplifier. Practical, a 12 V Trigger port allows the Atoll AM100 Signature amp to be automatically turned on when the pre-amplifier is switched on. Finally, an RCA stereo output is also required for easy bi-amplification.
- The Atoll AM100 Signature power amp has an RCA input and output – Equipped with a high power reserve and audiophile components, the Atoll AM100 Signature amplifier is a first choice solution for powering and fully exploiting compact or column speakers. Combined with hi-fi amps from the Signature range or any other pre-amplifier, the Atoll AM100 Signature delivers dynamic, clear and highly faithful reproduction.
Technical Specifications
Design
Symmetrical structure
Steel chassis
Mos-Fet transistors
680 VA toroidal transformer
Measurements
Power: 2×100 W under 8 ohms and 2×140 W under 4 ohms
Pulse power: 180 W
Power supply: 680 VA
Current capacity: 32,447 µF
Rise time: 1.77 µs
Input impedance: 47 kohms
Signal/noise ratio: 100 dBA
Frequency response: 5 Hz to 100 kHz
Connections
1x RCA stereo analog input
1x RCA stereo analog output
1x 12 V trigger input
Gold-plated screw terminals
General
Dimensions (WxHxD): 440 x 90 x 295 mm
Weight: 11 kg
