Description
Panasonic PT-MZ20K Series LCD Projector
The Panasonic PT-MZ20K Series LCD Projector has Multi-Laser Drive Engine and Backup Input enable continuous projection even in the event of trouble. No light-source or filter maintenance is required for up to 20,000 hours. The series efficiently delivers high brightness with MZ20KL achieving the lowest power consumption in its class.
Panasonic PT-MZ20K Series LCD Projector is is the industry’s first 20,000 lm-class projector delivering full brightness on AC 100–240 V power. It supports NFC function, optional lenses including ET-EMU100 Ultra-Short-Throw Zoom Lens, and preactivated upgrade kits for Geo Pro.
View Manual >> View Catalogue >> View Resources >>
Features
Lightweight, Compact, and Capable of High-Brightness Projection
Note: Volume and dimensions are approximate. Height is with legs at shortest position. Depth is without lens and protruding parts.
Introducing the world’s smallest and lightest LCD projector with 20,000 lm1. Optimized optical efficiency has resulted in a 25 % increase in brightness from the same body size as the 16,000 lm2 PT-MZ16KL. The compact and sophisticated design harmonizes with open halls and hybrid learning spaces. Images from PT-MZ20K Series are easily visible even in brightly lit areas, making it suitable for a wide range of applications, from large-screen projection at lectures and seminars to powerful exhibition presentations at museums.
1- Light output of PT-MZ20KL. As of March 2023, based on publicly available dimensions, weight, and operation noise values for LCD laser projectors with 20,000 lm brightness and above. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. 2- Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped.
World’s Quietest Operation Allows Viewers to Concentrate on Your Presentation
Panasonic PT-MZ20K Series LCD Projector achieves the world’s quietest1 operation at 42 dB2. Not only does it keep participants focused, it also contributes to an improved sound environment for applications such as hybrid conferences. When a quieter environment is required, noise level can be further reduced to
36 dB3 by setting the projector to QUIET Mode. This helps create an environment where all viewers can concentrate on the presentation.
1 – As of March 2023, based on LCD laser projectors with 20,000 lm brightness and above according to internal research. 2 – PT-MZ20KL in NORMAL Mode. Noise levels of other models in NORMAL Mode are 38 dB for PT-MZ17KL and 35 dB for PT-MZ14KL/MZ11KL. 3 – PT-MZ20KL in QUIET Mode. Noise levels of other models in QUIET Mode are 32 dB for PT-MZ17KL and 30 dB for PT-MZ14KL/MZ11KL. Brightness is reduced in QUIET Mode.
Pure White Generator Delivers High Brightness and Rich Color
Pure White Generator, developed by Panasonic Connect, contributes to rich color reproduction at high brightness of up to 20,000 lm1. Efficient light collection uses a multi-reflection system to minimize loss of light-source energy noticeable with conventional systems. It achieves an optimal color balance without sacrificing brightness for realistic and accurate color expression.
1 – Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped.
Delivering up to 20,000 lm1 on AC 100–240 V, an Industry First
Up to 20,000 lm1 on AC 100–240 V Power. This series is the first in the industry2 to achieve up to 20,000 lm1 on AC 100–240 V input voltage. Conventional projectors require an AC 200–240 V power supply to project at 20,000 lm1, but this series can project images using an ordinary power outlet. This eliminates need for high-voltage power supply installation, and greatly expands the range of situations in which a 20,000 lm-class projector can be deployed.
1 – Light output of PT-MZ20KL. Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. 2 – As of March 2023, based on LCD laser projectors with 20,000 lm brightness and above according to internal research.
Data Cloning Function Now Compatible with USB Memory
Data cloning function allows the user to copy settings and adjustment values from a Main projector to Sub projectors via LAN1 or USB memory device. This function reduces the time and effort required when setting up multiple projectors.
Smart Projector Control App for Smooth Installation
Smart Projector Control app allows you to control the projector from a smartphone. By scanning the QR code displayed on the OSD menu screen or Information Monitor and connecting to wireless LAN, switching input signals and other functions can be performed from a mobile device. In addition to being able to control up to 64 devices simultaneously, it also supports lens adjustment, test-pattern switching, and focus adjustment using your device’s camera from a distance of 30 m.
Geometric Adjustment Corrects Trapezoidal Distortion and Curved Screens
With built-in Geometric Adjustment, various distortions on the screen can be corrected via remote control. In addition to trapezoidal distortion resulting from angled projection, Curved Screen Correction fixes distortion caused by projection onto curved surfaces. Corner Correction allows the user to specify four screen corners, such as the upper right and lower right, for correction. Screen proportions can be maintained and corrections can be saved as data.
Other Features
- Detail Clarity Processor 4 Improves Dimensionality and Sharpness – Panasonic Connect’s unique image quality correction circuitry reproduces details more clearly and sharply. It analyzes video signal frequencies in each scene and adjusts for optimal sharpness based on information extracted from the signal. Compared to conventional image processing technology, this system reproduces images with an even more natural and three-dimensional feel.
- Supports 4K Signal Input – Uncompressed 4K/60p input signals1 are supported via HDMI® or DIGITAL LINK. Since no external devices such as converters are required, 4K signals can be processed smoothly. This eliminates the need for re-encoding when the projector is used with other 4K-compatible equipment, making projection with 4K signals simple and efficient. 1 – Input signals are converted to the projector’s display resolution upon playback. 4K/60p signals are supported via HDMI and DIGITAL LINK terminals. 4K/60p and 4K/50p signals input via DIGITAL LINK are supported in YPBPR 4:2:0 format only
- Lens Lineup is Compatible with AFO1 (Active Focus Optimizer) – A variety of optional lenses (eight models in total) are available to support a range of screen sizes between 80 and 600 inches, allowing you to select the optimal lens for your projection needs. These lenses are equipped with a temperature sensor and automatically correct focus in conjunction with the projector’s AFO2 function. This technology maintains a sharp image regardless of the brightness of the content, eliminating need for manual focus adjustment. Of course, powered lens-shift and zoom adjustment is also supported via remote control or Smart Projector Control app.
- Compatible with Ultra-Short-Throw Zoom Lens for Space-Saving Installation – ET-EMU100 Ultra-Short-Throw Zoom Lens has a throw ratio of 0.330–0.353:1 and a screen size range of 100–400 inches, and enables large-screen projection even from tight installation spaces. With no gap (offset area) between the ceiling and the screen, ET-EMU100 eliminates need for adjustment and expands the range of visual expression by supporting the zoom function despite its ultra-short focus.
Specifications – Panasonic PT-MZ20K Series LCD Projector
PT-MZ20KL |
PT-MZ17KL |
|
---|---|---|
Projector type | LCD projectors | |
LCD panel | ||
Size | 25.4 mm (1.0 in) diagonal (16:10 aspect ratio) | |
Display system | Transparent LCD panel (x 3, R/G/B) | |
Drive method | Active matrix method | |
Pixels | 2,304,000 (1920 x 1200 pixels) | |
Light source | Laser diode | |
Light output1, 2 | 20,000 lm | 16,500 lm |
Time until light output declines to 50 %3 |
20,000 hours (NORMAL/QUIET) | |
Resolution | WUXGA (1920 x 1200 pixels) | |
Contrast ratio1 | 3,000,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] set to [3].) |
|
Screen size (diagonal) | 2.03–15.24 m (80–600 in), 2.54–10.16 m (100–400 in) with ET-EMU100, 16:10 aspect ratio |
2.03–15.24 m (80–600 in), 2.54–10.16 m (100–400 in) with ET-EMU100, 2.03–12.70 m (80–500 in) with ET-EMT8004, 16:10 aspect ratio |
Center-to-corner zone ratio1 |
85 % | |
Lens | Optional (no lens included with this model) | |
Lens shift (from center of screen) |
||
Vertical | ±60 % (+50 %, -20 % with ET-EMU100, ±40 % with ET-EMW200, ±50 % with ET-EMW300) (powered) | |
Horizontal | ±20 % (±19 % with ET-EMW200) (powered) | |
Keystone correction range | Vertical: ±45 ° (±5 ° with ET-EMU100, ±14 ° with ET-EMW200/ET-EMW300, ±22 ° with ET-EMW400/ET-EMW500), Horizontal: ±40 ° (±0 ° with ET-EMU100, ±8 ° with ET-EMW200/ET-EMW300, ±15 ° with ET-EMW400/ET-EMW500). When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. |
|
Installation | Ceiling/floor, front/rear, free 360-degree installation | |
Terminals | ||
SDI IN | BNC x 1: 3G/HD-SDI input | |
HDMI IN | HDMI 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input5), CEC supported | |
SERIAL/MULTI PROJECTOR SYNC IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
SERIAL/MULTI PROJECTOR SYNC OUT |
D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
REMOTE 1 IN | D-sub 9-pin (female) × 1 for external control (parallel) | |
REMOTE 2 IN | M3 x 1 for wired remote control | |
REMOTE 2 OUT | M3 x 1 for link control (for wired remote control) | |
DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p signal input5) |
|
LAN | RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net) | |
DC OUT | USB connector (Type A) x 1 for power supply (Output: 5 V / 2 A) | |
USB | USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module, for USB memory | |
Power supply | AC 100–240 V, 50/60 Hz | |
Power consumption6 | ||
Maximum power consumption | 1100 W (11.2–4.6 A) (1120 VA) | 950 W (9.6–4.0 A) (960 VA) |
On-mode power consumption (Operating mode) |
|
|
Cabinet materials | Molded plastic | |
Filter | Included (Estimated maintenance time: approx. 20,000 hours7) | |
Operation noise1 | 42 dB (NORMAL), 36 dB (QUIET) | 38 dB (NORMAL), 32 dB (QUIET) |
Dimensions (W x H x D) |
Approx. 650 x 185 x 440 mm (25 19/32˝ x 7 9/32˝ x 17 5/16˝) (excluding feet and protrusions), 650 x 211 x 440 mm (25 19/32˝ x 8 5/16˝ x 17 5/16˝) (excluding protrusions, with feet at shortest position) |
|
Weight8 | Approx. 23.0 kg (50.7 lbs) | Approx. 22.5 kg (49.6 lbs) |
Operating environment | Operating temperature: 0–45 °C (32–113 °F)9, operating humidity: 10–80 % (no condensation) | |
Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro, Projector Network Setup Software, Smart Projector Control for iOS/Android™ |
|
TerminalsPT-MZ20K |
PT-MZ14KL |
PT-MZ11KL |
|
---|---|---|
Projector type | LCD projectors | |
LCD panel | ||
Size | 25.4 mm (1.0 in) diagonal (16:10 aspect ratio) | |
Display system | Transparent LCD panel (x 3, R/G/B) | |
Drive method | Active matrix method | |
Pixels | 2,304,000 (1920 x 1200 pixels) | |
Light source | Laser diode | |
Light output1, 2 | 14,000 lm | 11,000 lm |
Time until light output declines to 50 %3 |
20,000 hours (NORMAL/QUIET) | |
Resolution | WUXGA (1920 x 1200 pixels) | |
Contrast ratio1 | 3,000,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] set to [3].) |
|
Screen size (diagonal) | 2.03–15.24 m (80–600 in), 2.54–10.16 m (100–400 in) with ET-EMU100, 2.03–12.70 m (80–500 in) with ET-EMT8004, 16:10 aspect ratio |
|
Center-to-corner zone ratio1 |
85 % | |
Lens | Optional (no lens included with this model) | |
Lens shift (from center of screen) |
||
Vertical | ±60 % (+50 %, -20 % with ET-EMU100, ±40 % with ET-EMW200, ±50 % with ET-EMW300) (powered) | |
Horizontal | ±20 % (±19 % with ET-EMW200) (powered) | |
Keystone correction range | Vertical: ±45 ° (±5 ° with ET-EMU100, ±14 ° with ET-EMW200/ET-EMW300, ±22 ° with ET-EMW400/ET-EMW500), Horizontal: ±40 ° (±0 ° with ET-EMU100, ±8 ° with ET-EMW200/ET-EMW300, ±15 ° with ET-EMW400/ET-EMW500). When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. |
|
Installation | Ceiling/floor, front/rear, free 360-degree installation | |
Terminals | ||
SDI IN | BNC x 1: 3G/HD-SDI input | |
HDMI IN | HDMI 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input5), CEC supported | |
SERIAL/MULTI PROJECTOR SYNC IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
SERIAL/MULTI PROJECTOR SYNC OUT |
D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
REMOTE 1 IN | D-sub 9-pin (female) × 1 for external control (parallel) | |
REMOTE 2 IN | M3 x 1 for wired remote control | |
REMOTE 2 OUT | M3 x 1 for link control (for wired remote control) | |
DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p signal input5) |
|
LAN | RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net) | |
DC OUT | USB connector (Type A) x 1 for power supply (Output: 5 V / 2 A) | |
USB | USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module, for USB memory | |
Power supply | AC 100–240 V, 50/60 Hz | |
Power consumption6 | ||
Maximum power consumption | 800 W (8.1–3.3 A) (810 VA) | 615 W (6.3–2.7 A) (630 VA) |
On-mode power consumption (Operating mode) |
|
|
Cabinet materials | Molded plastic | |
Filter | Included (Estimated maintenance time: approx. 20,000 hours7) | |
Operation noise1 | 35 dB (NORMAL), 30 dB (QUIET) | |
Dimensions (W x H x D) |
Approx. 650 x 185 x 440 mm (25 19/32˝ x 7 9/32˝ x 17 5/16˝) (excluding feet and protrusions), 650 x 211 x 440 mm (25 19/32˝ x 8 5/16˝ x 17 5/16˝) (excluding protrusions, with feet at shortest position) |
|
Weight8 | Approx. 22.5 kg (49.6 lbs) | |
Operating environment | Operating temperature: 0–45 °C (32–113 °F)9, operating humidity: 10–80 % (no condensation) | |
Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro, Projector Network Setup Software, Smart Projector Control for iOS/Android™ |
1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped.
2 When [OPERATING MODE] is set to [NORMAL]. This is the value when the Zoom Lens (Model No.: ET-EMS650) is used. The value varies depending on the lens.
3 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, Normal Mode, [DYNAMIC CONTRAST] set to [3], under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output decreases to 50 % will vary depending on environment.
4 ET-EMT800 is compatible with PT-MZ17KL/MZ14KL/MZ11KL only. It cannot be used with PT-MZ20KL.
5 4K signals are converted to the projector’s resolution (1920 x 1200 pixels) upon projection. 4K/60p and 4K/50p signals input via DIGITAL LINK are supported in YPBPR 4:2:0 format only.
6 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft).
7 Under conditions of 0.15 mg/m3 of particulate matter. Estimated maintenance time varies depending on environment. Filter can be washed and reused up to two times.
8 Average value. May differ depending on the actual unit.
9 Note that the projector cannot be used at altitudes 2,700 m (8,858 ft) or higher above sea level. In the following operating environments, light output may be reduced to protect the projector: when the projector is used at altitudes below 1,400 m (4,593 ft) and ambient temperature is 35 °C (95 °F) or higher; when the projector is used at altitudes between 1,400 m (4,593 ft) and 2,700 m (8,858 ft) exclusive and ambient temperature is 30 °C (86 °F) or higher. The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) when the optional AJ-WM50 Series Wireless Module is attached.