Luxman LMC-5 MC Cartridge

$5,149.00 inc GST

The Luxman LMC-5 MC Cartridge has reliable groove reading, accurately articulating the most delicate music signals pressed on vinyl.

The MC type power generation engine features a cross-mounted iron core with a compact magnetic system to improve efficiency.

Do you need an expert?

Our customers tell us that they count on our team for more than just knowledge: they’re always friendly & ready to help with all their questions. Contact our team CJ, Bensan or Toki on 092744515 or via

SKU: LMC-5 Categories: , , , EAN: 4958136036218 Brand: GTIN / EAN: 4958136036218


Luxman LMC-5 MC Cartridge

For the vibration detection system on the Luxman LMC-5 MC Cartridge they selected a combination of an aluminum cantilever and a SHIBATA stylus, which boasts excellent tracing ability.

In addition, the unique housing structure was achieved by repeated prototyping and fine tuning. They have developed this cartridge with confidence for all those who love vinyl and value its musicality.

LUXMAN’s latest phono cartridge is the LMC-5. After 40 years’ experience, our aim was to design it to have sensitivity to all the musical information pressed on a record.


View Product Details >> View Luxman Products >>



Stylus and power generation engine

LUXMAN has consistently designed components for vinyl playback such as their PD series analog players and our E/EQ phono equalizer amplifier series. After a development period of 2 years, the LMC-5 is LUXMAN’s first original cartridge in 40 years.

For the stylus, in order to read the musical information pressed on the record accurately and reliably, they selected a combination of an aluminum cantilever with high tracing ability and a SHIBATA stylus to pick up a large amount of information with less audible noise.

In order to secure the fulcrum of the vibration system, a low distortion structure has been realized by using the one-point “piano wire” support method.

The MC type power generation engine uses a cross mounted iron core with the coils for the left and right channels wound symmetrically. Adopting a magnetic structure with a small field area reduces the intrusion of external noise. We have achieved significant size and weight reductions.

Body structure and design

From their experiences with closed body designs, the coil and cantilever can act like a microphone, picking up the reflected sound, therefore reducing the enclosure results in less sound coloration. In order to prioritize weight reduction and resonance countermeasures, the housing is crafted down to a minimal design which still firmly supports the power generation engine.

The minimized outer chassis has an inverted egg-shaped curve that suppresses unnecessary reflected sound and vibrations.

The machined aluminum body is anodized to a deep red, which is LUXMAN’s corporate color, and with the L mark logo laser-etched on the front, it subtly asserts LUXMAN’s identity.

Each one is carefully assembled by their team of craftspeople, the best in Japanese cartridge manufacture, and delivered to music lovers, worldwide.

Replacement of stylus tip
  • This Luxman LMC-5 MC Cartridge has a fixed stylus tip.
  • If you wish to replace it due to wear on the stylus tip over time, please consult with the store where you purchased it or contact your local LUXMAN distributor.



Internal impedance 4.7Ω (1kHz)
Tracking force 2.1 to 2.3g (2.2g as standard)
Output voltage 0.4mV (1kHz, 3.54cm / sec.)
Frequency response 10Hz to 35kHz
Channel separation / balance 28dB (1kHz) / 0.5dB (1kHz)
Recommended load impedance
(when head amplifier is connected)
40Ω or more
Recommended load impedance
(When step-up transformer is connected)
2.5 to 10Ω
Dynamic compliance 8 x 10-6cm / dyne (100Hz)
Stylus Solid diamond / SHIBATA stylus
Cantilever Φ0.5mm aluminum
Vertical tracking angle 25°
Magnet Samarium-cobalt magnet BH20
Coil 30μm UEW
Material of magnetic circuit Pure iron
Terminals Φ1.2mm, White (L+) , Blue (L−) , Red (R+) , Green (R-)
Body Aluminum A6063
Dimensions, Threaded holes 17.0 (W) x 18.3 (H) x 21.3 (D)mm (excluding terminals),
M2.6mm x 2
Weight 8.5g
Accessories Manual, Washer x 2, Screws M2.6 (5mm x 2, 8mm x 2, 10mm x 2),
Hex wrench and stylus cover

* Specifications and appearance are subject to change without notice.
* The products listed in this catalog do not include line cables. Please purchase cables separately.

Additional information

Weight .05 kg
Dimensions 25 × 25 × 10 cm


You may also like…