Description
The Rega Neo PSU Advanced Turntable Power Supply is compatible with the following Rega turntable models:
P3-24 / RP3 / Planar 3 2016 / RP6 / P5 / P7 / RP40 special edition / RP8 Or any older Rega turntable fitted with our aftermarket 24v Motor Upgrade Kit.
Using the same DSP (digital signal processing) generator found in the RP10 the Rega Neo PSU Advanced Turntable Power Supply is built upon a high stability crystal. The Rega Neo PSU Advanced Turntable Power Supply features an advanced anti-vibration circuit, fine motor speed adjustment and the convenience of electronic speed change. The DSP generator will divide the accurate signal from the crystal to the exact frequency required to turn the platter at the selected speed whilst producing a near perfect sinusoidal waveform to drive the 24v motor.
TECHNICAL SPECIFICATIONS
Output to motor bi-phase – 24 V AC protected by resettable fuse
Power consumption – 7.2 W
Voltage – 24 V AC
Power supply – Rega PS1 only
Speed control step size – 0.01 RPM
PS1 (UK) – Input 230 V ~ 50 Hz 0.07 A / Output 24 V ~ 350 mA AC
PS1 (EU – Euro 2 pin) – Input 230 V ~ 50 Hz 0.07 A / Output 24 V ~ 350 mA AC
PS1 (American) – Input 115-120 V ~ 60 Hz / Output 24 V ~ 350 mA AC
PS1 (Australian) – Input 230 V ~ 50 Hz 0.07 A / Output 24 V ~ 350 mA AC
PS1 (Japan) – Input 100 V ~ 50/60 Hz / Output 24 V ~ 350 mA AC
PS1 (Korea) – Input 220 V ~ 60 Hz 0.07 A / Output 24 V ~ 350 mA AC
