Luxman L-505uXII Integrated Amplifier - Rapallo | AV Design & Installation
Select Page

Luxman L-505uXII Integrated Amplifier

$7,999.00 inc GST

or from $6,499.00 today & 5 weekly interest-free payments of $300.00 with Laybuy what's this?


The attraction of the L-505uXII is its new level of refinement, approaching perfection as an authentically desirable product

The L-505uXII is the eagerly awaited Mark II version of the popular L-505uX that has been at the forefront of pre-amplifier design since it’s launch in 2011. Incorporating an abundance of proprietary technologies, such as Luxman’s Version 4.0 ODNF (Only Distortion Negative Feedback), as well as LECUA (Luxman Electronically Controlled Ultimate Attenuator), this product is a truly multifunctional integrated amplifier. As Luxman’s latest high-end model, the L-505uXII continues the evolution of the L-505 series, which has attracted many fans of audio quality and earned a great reputation.

As an amplifier which exudes sophistication and authenticity beyond its class, the L-505uXII represents the latest in a long line of exemplary models.

Description

Download Spec Sheet >>

 

ODNF* Version 4.0 – Innovative amplification feedback circuit
An integral part of the design of the L-505uXII is LUXMAN’s original ODNF amplification feedback circuit featuring a high-speed primary slew rate, an ultra-wide bandwidth and a low level of distortion that is achieved by feeding back only the distorted components of the audio from the amplifier’s output circuit. The L-505uXII is equipped with the latest Version 4.0 ODNF circuit, resulting in a dramatically enhanced accuracy in distortion detection due to the paralleled first stage and Darlington equipped second stage amplification circuit, as well as a paralleled first stage error detection circuit. With it’s lower impedance and higher S/N ratio, the L-505uXII realizes accurate reproduction of even the gentlest audio signals and achieves a full range of dynamic musical expression. The output stage, with it’s parallel push-pull structure, has secured sufficient power at 100W+100W(8Ω) and 150W+150W(4Ω).

 

Highly accurate LECUA computerized attenuator
LECUA (Luxman Electronically Controlled Ultimate Attenuator) is at the heart of the pre-amplifier section and the sound volume adjustment function of the L-505uXII. The L-505uXII design also uses a solid state(IC) type circuit to achieve a significant reduction in size. LECUA provides an ideal level control mechanism that allows smooth and fine volume adjustment over 88 steps, thereby minimizing any deterioration of the audio signal. In addition, left and right balance adjustment is integrated into the attenuator’s control functions. The multifunctional ability of LECUA ensures accuracy over the full range of the volume control, whilst suppressing any deterioration of sound quality. The volume may also be adjusted with the remote control, but when adjusting the volume manually, the tactile design and gradual motion of the control itself enables intuitive adjustment of the attenuation level.

 

Discrete buffer circuit
The L-505uXII features a new discrete buffer circuit in the output stage of the pre-amplifier circuit that is equivalent to the type used in our high-end C-900u separate amplifier. The pre-amp output stage is able to drive the signal with enhanced current supply capacity. The clarity of the audio signal is protected, whilst at the same time, the driving force fed through to the power amplifier stage is significantly increased. The power and reproduction capability of the L-505uXII achieves overwhelming scale sensitivity and a sharpness on start-up that cannot be achieved by conventional pre-amplifiers.

 

High stability power supply
The power supply of the L-505uXII consists of an EI core type power transformer, highly regulated, with four large capacity 10,000μF blocking capacitors creating a highly stable power supply. This ensures an instantaneous, constant and stable current supply.

 

Low impedance transmission
Large-capacity, low resistance speaker relays are connected in parallel to enable lossless transmission for the powerful driving force that is generated by the large-scale output circuit. In addition, the damping factor has been improved from 180 to 210 by lowering the impedance of the wiring pattern.

 

Original technologies prioritize sound quality
To realize a smooth, stress free signal transmission LUXMAN use an original Beeline construction that features a non-angled wiring pattern to allow smooth signal transmission along the shortest optimal route. This is one of many examples of a LUXMAN original design that makes sound quality a priority.

 

A wide variety of custom-made components for high sound quality components for high sound quality
OFC cabling is used in the internal wiring of the L-505uXII, achieving natural signal transmission due to the spirally wrapped shielding on each non-plated wire core. A high quality input selector IC is employed to improve separation and eliminate crosstalk. This model is generously equipped with many custom-made parts designed to achieve high sound quality such as in-line layout speaker terminals for easier speaker cable connection.

 

An abundance of user-friendly functions
The L-505uXII is equipped with a high quality phono pre-amplifier that is compatible with MM and MC cartridges supporting full analog reproduction. This model offers all the functions that a high quality pre-main amplifier should offer such as bass/treble tone control, L/R balance adjustment using LECUA, pre/power separation function, volume function and headphone output to name a few.

 

SPECIFICATIONS

Rated output 100W + 100W (8Ω),
150W + 150W (4Ω)
Input sensitivity/input impedance PHONO (MM): 2.5mV/47kΩ
PHONO (MC): 0.3mV/100Ω
LINE: 180mV/47kΩ
BAL.LINE: 180mV/55kΩ
MAIN-IN: 1V/47kΩ
Output voltage REC OUT: 180mV, PRE-OUT: 1V
Frequency response PHONO: 20Hz to 20kHz (within -3dB)
LINE: 20Hz to 100kHz (within -3dB)
Total harmonic distortion 0.009% or less (8Ω, 1kHz)
0.09% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A) PHONO (MM): 91dB or more
PHONO (MC): 75dB or more
LINE: 104dB or more
Volume adjustment LECUA
Amplification circuit ODNF 4.0
Output configuration Bipolar parallel push-pull
Damping factor 210
Max. amount of tone control BASS: ±8dB at 100Hz
TREBLE: ±8dB at 10kHz
Power supply 230V~(50Hz) / 115V~(60Hz)
Power consumption 270W
85W (under no signal), 0.4W (at standby)
External dimensions 440(W) x 178(H) x 454(D) mm
front side knob of 20mm and rear side terminal
of 27mm included in depth
Net weight 22.5kg (main unit)
Accessories Remote control (RA-17A)
Power cable
Speaker terminal Supported Y-lug terminal dimension Width of part a: 15mm or less
Width of part b: 8mm or more
* Connection may not be performed
depending on the shape of the
Y-lug terminal.

Additional information

Weight 22.5 kg
Dimensions 45.4 × 44 × 17.8 cm
Brand

Luxman

Why buy from us?

Rapallo is an independently owned New Zealand company and with more than 15 years experience, we offer you both technical expertise and superior service.

Rapallo is fully authorized to sell products by all of the manufacturers listed on our website and in our store. In most cases we are more than a reseller, we are a direct dealer who also receives training and where possible we personally test products we sell.

 

Authorized dealers like us offer peace of mind. Rapallo

  • meets manufacturer’s standards, from sales to service, in order to receive authorized status.
  • often receives training directly from manufacturer representatives and shares that expertise with you.
  • provides  support for all the products they sell.
  • ensures that manufacturer warranties will be honoured.
  • buys directly from big brand manufacturers and guarantee you buy NZ new, (no grey imports or parallel imports).

The Internet is an incredibly convenient information source and a wonderful way to find savings on the products you want. Protect yourself online by buying from authorized dealers, with genuine feedback and reputations.

 

A price too good to be true, usually is.
If you’ve ever searched for a product on a shopping engine (such as Priceme/Pricespy) you may have asked yourself, “Why are some stores charging so much less than other stores?”

Our customers often share these stories with us, so we thought we would share a few with you, in hopes that you don’t fall prey to any of these unscrupulous sales tactics.

  • Goods may be grey market/parallel imported. They may state that the product includes the manufacturer warranty, but not tell you that the warranty is valid only in Europe, Japan, or South America, and NOT in NZ.
  • You may be asked to buy an expensive extended warranty. In many cases if you do not purchase the warranty, your purchase will be denied. (The product is now out of stock, your card does not go through, etc.)
  • Included parts may be sold to you separately. Some resellers will open boxes and charge extra for parts that are normally included by the manufacturer.
  • Hidden charges which don’t show up until your credit card statement arrives, these charges only show up when your credit card statement is sent to you.
  • When something goes wrong, faulty, late delivery, doesn’t matter how many times you try to email, they don’t get back.
  • There are so many scamming online sellers today, “buyer beware” protect yourself!

 

Think you have a better price from someone in NZ (authorised dealer)? Call us, we’ll see what we can do.

 

Concerned About Fraud?
The internet has become a more popular source for online shopping, regrettably we have seen more and more instances of fraud affecting online shoppers. Companies trading under many  different names, loading warranties and charging for them as extras when often they are included from the manufacturer. Parallel imports or personal imports where the NZ supplier refuses to repair when things go wrong is often alarming to the unsuspecting purchaser. Inflated freight charges, customs and GST at the border are often forgotten as a buyer is tempted by a lower price. Constantly we hear all these stories, once bitten it’s all to late looking for that refund or replacement. The stories are outrageous at times, customers from Trademe and ebay with no place to turn, time consuming and very frustrating…

 

So how do you protect yourself from online fraud?

  • Buy from an authorized reseller. If you are at all suspicious, contact the manufacturer directly and ask if a company is authorized to sell their products.
  • Make sure you get a company invoice with GST clearly marked.
  • Make sure you buy from someone who has a phone number and an address on their website, not a P.O.Box number
  • Read customer feedback, you can usually tell if it’s genuine or not.

We hope that you will become our next happy customer. And we promise to offer you superior service before, during and after your purchase.

You may also like…

TRUSTED BY NEW ZEALANDER'S SINCE 2005. @ RAPALLO WE SUPPLY & STOCK THE LATEST AUDIO VISUAL TECHNOLOGY AND AV DESIGN CONCEPTS.

SUPPORT


Customer support is very important to us. Deano, Bensan or Simon are on-hand for you via Phone, Online Chat, Email and Social Media. We're here to help, no matter if the question is big, or small!

EXPERT ADVICE


We are 100% NZ owned, and our product specialists are here to help you with your questions. Or perhaps pop in & experience our Demo Rooms for the ultimate in "try-before-you-buy".

SAFE & SECURE


We have many Payment Options available to suit your needs. We have extensively tested our platforms to ensure ALL transactions are safe and secure, each and every day

FREE SHIPPING


For all online orders over $300 we offer you FREE shipping anywhere in New Zealand. Best brands, best service and now an unbeatable deal to get the products to you!

Visit Us

Rapallo Ltd.
11A Allens Road
East Tamaki
Auckland 2013
Monday to Thursday
9:00-5:00, Friday 9:00-4:00
Saturday 9:00-12:00
By appointment:
After business hours

Follow us here
Contact Us


Call us on 09 2744515 or email us on sales@rapalloav.co.nz

Rapallo | Payment Details

Copyright © 2019 Rapallo | Terms & Conditions | Privacy Policy

[]