Description
Download Specifications >>Download Manual >>
Three-Way Driver Design.
The Elac Debut 2.0 F6.2 floorstanding speaker features a three-way driver design with a 1″ tweeter, one 6.5″ midrange drive, two 6.5″ bass woofers, and a 90Hz/2200Hz crossover network.
The tweeter, midrange driver, and woofers have been custom designed by Andrew Jones to deliver an exceptional audio experience that can’t be delivered with typical off-the-shelf parts.
Cloth Dome Tweeter w/ Wave Guide.
The 1″ silk soft-dome tweeter features a wide-roll surround that improves power handling and a waveguide that improves directivity control by eliminating cabinet diffraction inherent in traditional box enclosures.
The 1″ silk soft-dome tweeter candle handle high frequencies up to 35,000 Hz.
Woven-Aramid Fiber Woofers.
The floorstanding speaker features three 6.5″ woven aramid-fiber cone woofers (1 midrange driver/2 bass woofers) with rubber surround, oversized magnet, and vented pole piece.
The revised shape of the aramid cone offers even greater stiffness and damping; far superior to polypropylene or paper.
The added strength allows more flexibility in design to achieve a smoother, extended low-frequency response.
Custom Crossover.
A custom nine-element crossover (90Hz/2200Hz) with audio-grade components is implemented to ensure smooth transition between the tweeter, midrange driver, and bass woofers.
Bass Reflex MDF Cabinet.
The Elac Debut 2.0 F6.2 floorstanding speaker uses a bass reflex cabinet with three rear-firing flared ports for greater efficiency and bigger bass response.
The cabinet is made of MDF (Medium Density Fiberboard) to strengthen and stiffen the cabinet, helping minimize unwanted vibrations that can discolor music or movie content. The MDF outer walls of the cabinet are covered with a black ash wood-grain vinyl finish. A detachable cloth grille is included.
5-Way Binding Posts: The Elac Debut 2.0 series DF62 floorstanding loudspeaker is fitted with a set of 5-way binding-post terminals which will accept bare-wire (up to 10AWG), pin-connectors, spade-lugs, and banana plugs (single or dual).
Spike Feet.
The Elac Debut 2.0 F6.2 floorstanding speaker features an integrated plinth (base) and comes with 4 spike feet. The spikes screw into the the speaker cabinet’s integrated plinth (base).
The spike feet work great on carpeted flooring. You should place protective discs (not included) under the spikes, if you are placing the speaker on hardwood or tile flooring (no rubber feet are included).
- Dimensions with Spike Feet: 8.125″ (w) x 44.3125″ (h) x 11.625″ (d)
- Dimensions without Spike Feet: 8.125″ (w) x 43.4375″ (h) x 11.625″ (d)
SPECIFICATIONS
Enclosure Type : 3- Way Bass Reflex
Frequency Response: 39Hz – 35000Hz
Nominal Impedance: 6 Ohms
Sensitivity: 87db @2.83v/1m
Crossover Frequency: 90Hz/2200Hz
Max Power Input: 140 Watts
Tweeter: 1″ Cloth Dome
Woofer: Triple 6-1/2″ Aramid Fiber
Cabinet: CARB2 Rated MDF
Cabinet Finish: Black Ash Vinyl
Port: Dual Flared
Binding Posts: 5 – Way Metal
Dimensions (WxHxD) : 7.69″ x 43.18″ x 10.55″
