Dynaudio BM6A Active Nearfield Studio Monitor

Description

About the Dynaudio BM6A Active Nearfield Studio Monitor

Each Dynaudio BM6A Active Nearfield Studio Monitor features a 6.5-inch MSP bass/midrange driver and a 28mm soft-dome tweeter. Two discrete MOSFET amplifiers provide 100 watts per driver, while an electronic crossover divides the signal before amplification.

A balanced XLR input connects to an audio interface, mixing console or suitable preamplifier. Rear-panel adjustments allow you to tailor the response and input sensitivity to your system.

**This listing covers the BM6A Classic, which is a different design from the BM6A MkII.

 

 

View Manual >> View Brochure >> View Dynaudio Professional >>

 

→ What We Think About The Dynaudio BM6A

The BM6A brings a straightforward approach to serious monitoring: dedicated amplification, capable drivers and practical analogue controls. It makes particular sense for listeners who already have an audio interface or preamplifier and want to concentrate their budget on sound reproduction.

Its appeal extends beyond recording studios. A pair connected to a suitable DAC/preamp can form a compact home listening system, with no separate power amplifier required. The key is choosing a source with proper volume control.

For studio use, the BM6A offers a useful balance between cabinet size and bass capability. However, positioning remains important. Give the rear port and amplifier heatsink breathing room, and use stable stands or suitable isolation supports.

We recommend it for dedicated listening spaces and production rooms where dependable stereo monitoring matters more than wireless connectivity or app features.

 

→ Suggested System Match

The BM6A works best with a source that provides clean line-level output and convenient volume control. An audio interface is the natural choice for production, while a DAC/preamp suits home listening.

Position both monitors at equal distances from the listening seat, aimed towards the listener. Dynaudio’s manual suggests a typical listening distance of approximately one to three metres. Keep the arrangement symmetrical where possible.

For extended bass monitoring, the Dynaudio 18S is a useful partner because it includes a preset for the BM6 Classic. Route the signal through the subwoofer’s outputs when using its integration functions, then adjust placement and levels for your room.

Recommended With This Product

• Dynaudio 18S Subwoofer: Adds deeper bass coverage and DSP integration, including a BM6 Classic preset.
• Balanced Audio Interface: Provides computer connectivity, monitor-level control and suitable analogue outputs.
• DAC/Preamplifier: Enables a compact home listening system with controlled line-level output.
• Balanced XLR Interconnects: Connect compatible sources directly to each monitor.
• Monitor Stands or Isolation Supports: Help establish suitable listening height and reduce vibration transfer.
• Acoustic Treatment: Helps manage reflections and bass irregularities that speaker adjustments alone cannot resolve.

 

→ The Dynaudio BM6A Is Ideal For

• Recording and mixing in project studios
• Editing vocals, podcasts and dialogue
• Music production and arrangement
• Nearfield listening in dedicated rooms
• Systems with balanced audio interfaces
• Home listening through a DAC/preamp
• Buyers seeking active speakers with analogue controls
• Existing studios expanding a BM6A monitoring system

 

Frequently Asked Questions

1. Is the Dynaudio BM6A sold individually or as a pair?
   It is supplied individually. Order two monitors for a conventional stereo setup.
2. Does the BM6A require a separate amplifier?
   Each monitor contains dedicated amplifiers for its woofer and tweeter. It needs mains power and a suitable line-level audio source.
3. Is this the same speaker as the BM6A MkII?
   The BM6A Classic and BM6A MkII are different products with different drivers and amplifiers. This listing covers the Classic design.
4. How do I connect it to a computer?
   Use an audio interface or DAC with suitable analogue outputs. The BM6A does not connect directly through USB.
5. Does it have RCA inputs?
   Each monitor has one balanced XLR input. An unbalanced source can connect using correctly wired cabling, although a balanced connection is preferable where available.
6. How do I control the volume?
   Use the volume control on your interface, monitor controller or preamplifier. The speaker’s sensitivity switch is for system matching rather than everyday listening adjustment.
7. Can I use the BM6A for home hi-fi listening?
   A pair can connect to a suitable DAC/preamp or streamer with variable analogue outputs. This creates a system without a separate power amplifier.
8. Does it support Bluetooth or Wi-Fi?
   Wireless playback requires an external source that converts the signal to analogue audio for the XLR inputs.
9. What listening distance is recommended?
   Dynaudio suggests approximately one to three metres. Room size, speaker spacing and placement will affect the best position.
10. Can it sit close to a wall?
    Placement near walls changes bass response. Leave room for the rear port and heatsink, then assess positioning before adjusting the LF trim.
11. Can I add a subwoofer?
    Use a suitable subwoofer or bass-management system between the source and monitors. The Dynaudio 18S includes a BM6 Classic preset.
12. Do the rear controls provide automatic room correction?
    No. They provide manual response and sensitivity adjustments. Careful placement and acoustic treatment remain important.
13. Can I connect a turntable directly?
    A turntable needs a suitable phono stage and volume control before feeding the monitors. Most turntables cannot connect directly.
14. What does the 118dB maximum SPL figure mean?
    Dynaudio specifies this for a pair measured at one metre. It is not the output rating of a single monitor.

 

Key Features

Dedicated Amplification for Each Driver

Two discrete MOSFET amplifiers deliver 100 watts to the woofer and 100 watts to the tweeter. Each amplifier operates within its assigned frequency range, providing direct control of its driver without requiring an external power amplifier.

Dynaudio MSP Bass/Midrange Driver

The 6.5-inch Magnesium Silicate Polymer driver handles bass and midrange reproduction. Its cone construction and aluminium voice coil support controlled movement, helping the monitor reproduce low-frequency detail alongside voices and instruments.

28mm Soft-Dome Tweeter

The soft-dome tweeter handles upper-frequency information, including vocal articulation, cymbal texture and recorded ambience. Its dedicated amplifier allows the high-frequency section to operate independently of the demands placed on the woofer.

Fourth-Order Active Crossover

An electronic, phase-aligned crossover divides the signal at 2.2kHz. Working before the power amplifiers, this fourth-order network manages the transition between drivers and helps them operate together across the vocal and instrumental range.

Balanced XLR Connectivity

A balanced XLR input provides a direct connection to professional audio interfaces, mixers and compatible preamplifiers. Balanced wiring helps reject interference, making it useful in studios with multiple powered devices and longer cable runs.

Adjustable High-Frequency Response

The rear HF trim adjusts the treble balance to suit the listening environment. It provides a practical way to refine the presentation in reflective spaces, complementing careful speaker positioning and appropriate acoustic treatment.

Flexible Low-Frequency Tuning

The LF adjustment changes the balance between bass extension and output capability. This allows you to adapt the monitor’s low-frequency behaviour to your placement and listening requirements without adding an external equaliser.

Selectable Input Sensitivity

The rear-panel level switch offers +4 and −10 settings for different source levels. This helps integrate the BM6A with professional equipment or lower-output sources while keeping everyday volume adjustment at the interface or preamplifier.

Integrated Driver Protection

Protection circuitry monitors operating conditions to help safeguard the drivers and amplifiers. Front-panel indicators show power, fault and low-frequency clipping status, providing useful feedback when setting levels or checking system operation.

Danish-Made Cabinet Construction

Made in Denmark, the BM6A combines a matte cabinet with rounded front-baffle edges. Its rear bass-reflex port supports low-frequency output, while the substantial enclosure provides a stable platform for the drivers.

 

Specifications

Brand: Dynaudio
Model: BM6A Classic
Product Type: Active nearfield studio monitor
Configuration: Two-way, bi-amplified
Enclosure: Rear-ported bass reflex
Bass/Midrange Driver: 6.5-inch MSP
Tweeter: 28mm / 1.1-inch soft dome
Woofer Amplifier: 100W
Tweeter Amplifier: 100W
Amplifier Design: Discrete MOSFET
Frequency Response: 41Hz–21kHz, ±3dB at 85dB
Maximum SPL: 118dB at one metre, measured with a pair
Crossover Frequency: 2.2kHz
Crossover Type: Electronic, fourth-order, phase-aligned
Crossover Slope: 24dB/octave
Analogue Input: One balanced XLR per monitor
Input Sensitivity Settings: +4 / −10
High-Frequency Adjustment: Rear-panel HF trim
Low-Frequency Adjustment: Rear-panel LF trim
Indicators: Power/fault and low-frequency amplifier clipping
Protection: Thermal overload, DC protection and HF limiting
Typical Listening Distance: Approximately 1–3m
Maximum Power Consumption: 200W per monitor
Mains Connection: IEC inlet; voltage selector must match local supply
Dimensions: 217mm W × 338mm H × 321mm D
Weight: 11kg per monitor
Finish: Matte black
Country of Manufacture: Denmark
Pack Quantity: One monitor

 

Why Buy From Rapallo

✔ Help choosing monitors for your room and listening distance
✔ Advice on audio interfaces and preamplifier compatibility
✔ Balanced cable and connection guidance
✔ Subwoofer matching and integration advice
✔ Practical support with placement and system planning
✔ New Zealand-based product support
✔ Contact us for current availability and delivery options