HDMI Splitter With 3D Pass-Through

Our "One In Four Out" HDMI Splitter with 3D pass-through is a very well made, robust, all metal splitter. It’s just great for splitting your HDMI source to two displays e.g. projector and TV. Many of the new receivers only have one HDMI out; this fully powered HDMI splitter will easily turn that one HDMI port into four HDMI ports in minutes. Suitable for HDMI DVD players, MySky HDi, Freeview HD, PS3, Xbox360, blu-ray players and all other HDMI sources.
 
There is absolutely no loss if signal quality with this device!
Supports HD Lossless audio codecs, Dolby TrueHD & DTS-HD Master Audio

Introduction:

The HDMI 1 in 4 out Amplified Splitter with 3D pass-through is an HDMI splitter with two HDMI outputs. It distributes the input of the HDMI signal into four identical outputs simultaneously without any loss. Each amplifier splitter’s output can achieve long distance transmission of HDMI signals maybe more than 15 meters when using high grade HDMI cables. When two or more products are cascaded, they can create a larger distribution and even longer in length. Easy to install in seconds!

HDCP Support

Perhaps one of the most important features of a high quality HDMI splitter is HDCP support. HDCP (High Definition Content Protection) not only protects the content from being pirated, but ensures that the content makes it unaltered to the display as long as the rest of your hardware is set up properly.

High Quality Construction

Wire gauges and the high quality construction of this splitter allows for an operating frequency of 225MHz. HDMI 1.3b and 1440p resolutions are supported, future proofing you from many years of future HDMI development. The heavy-duty cool metal enclosure protects the insides and keeps the unit cool by aiding in quick heat absorption and dissipation.

Specifications

Resources

FAQ

1). The splitter does not appear to be functioning.
Check if the LED lights, the power supply and cables is well connected and in good condition. Make sure the length of the cables is within the MAX supported length of this splitter. Lastly, please try to connect the input device to the display directly by cables less than 3 meters to see if it display normally.
 
2). If the MAX. resolutions of the two displays are not the same, what resolution will be output?
The splitter will output at the lower resolution if both displays are running at the same time and where one display is 720p and the other 1080p. If you turn off the display with the lower resolution, the 1080p display will display at 1080p.
 
Some 720p/1080i displays will not accept a 1080p signal, if thats the case you must lower the resolution at the source to match that display.

Read this:

All HDMI Splitters can sometimes have handshaking issues if the source is set to 1080p and there are displays of mixed resolutions (1080p & 720p) If all displays are 1080p the source will handshake perfectly when set to 1080p. If there are displays with mixed resolutions and problems occur it’s always recommended to set the source to 720p or 1080i.